General Instructions PLEASE READ BEFORE INSTALLATION WARNING: The safety of this fitting can only be guaranteed if the following instructions are observed during both installation and use. Please retain these instructions safely after installation. CARE INSTRUCTION: – Vacuum frequently on medium power. Remove wet stains by carefully dabbing with a lint-free cloth or sponge wrung in warm detergent-free water.
Page 3
Catena Modular Sofa Collection Overview Open End Module - Left Open End Module - Right Armrest End Module - Right Small300 / Large300 Small301 / Large301 Small401 / Large401 Chaise Longue - Left Chaise Longue - Right Armrest End Module - Left Small600 / Large600 Small601 / Large601 Small400 / Large400...
Page 4
Assembly Process – Removing Cover Gently tip the sofa onto its backrest. Unzip the zipper underneath the seat. Locate the two velcro strips on the inside of the structure and undo them to release the black inlay fabric.
Page 5
Assembly Process – Removing Cover Next, undo the velcro fastenings from all four corners of the seat.
Page 6
Assembly Process – Removing Cover Now, the cover can be carefully removed. Return the sofa to a standing position. Reach inside the crack where the seat connects with the backrest/armrest and pull the fabric loose.
Page 7
Assembly Process – Removing Cover Once the fabric is loose, pull the cover up and off the backrest.
Page 8
Assembly Process – Putting on Cover Repeat steps backwards when putting the cover back on. Note: The cover can be pulled tighter to remove any wrinkles or loose fabric which may form over time. Attention: When removing and putting on covers, be careful that the connection system does not get in the way and cause damage to the fabric.
Need help?
Do you have a question about the Catena Small300 and is the answer not in the manual?
Questions and answers