Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ferm Haze Sideboard
Summary of Contents for Ferm Haze Sideboard
- Page 1 HAZE SIDEBOARD ASSEMBLY MANUAL...
- Page 2 BOX CONTENTS 1 x cabinet 1 x legs 1 x shelf 1 x u-formed stabiliser 4 x M8 16 mm screws 2 x M5 10 mm screws 2 x rubber pads 2 x wall-safety set 1 x hex key 5 mm 1 x hex key 3 mm (M6 16 mm screws x 2)
- Page 3 NEEDED IN ORDER TO ASSEMBLE Min. two people Spirit level 2 x screws 2 x rawlplugs Screws and rawlplugs are not inlcuded, as different kinds of walls require different rawlplugs/screws. Power drill Screwdriver Pencil Warning...
- Page 4 ASSEMBLY PROCESS M8 16mm screws for all 4 corners Use 5 mm hex key Please mount the cabinet to the legs using the screws indicated above.
- Page 5 ASSEMBLY PROCESS We recommend mounting the sideboard against a wall with the incuded wall safety set. Mount the wall safety set onto the sideboard and place it against the wall. Screw the wall safety onto the cabinet. Do not tighten screws yet. M6 16 mm screws x 2 Use 4 mm hex key Remember to level the sideboard...
- Page 6 ASSEMBLY PROCESS 2 x M5 10mm screws Use 3 mm hex key Insert the u-formed stabiliser inside the cabinet so that it faces downwards. Place it upon the pre-drilled holes at the bottom of the cabinet, then use the hex key to fasten the two screws from underneath.
- Page 7 ASSEMBLY PROCESS Add the two rubber pads Add the two rubber pads on top of the u-form to prevent friction between the parts. Then place the metal shelf inside the cabinet and lower it down, so that it ends up resting upon the u-form as well as the support in the four corners.
- Page 8 fermliving.com...
Need help?
Do you have a question about the Haze Sideboard and is the answer not in the manual?
Questions and answers