Advertisement
Quick Links
Galvanised
weld-On Lifting Point
loadable from any side
> G-ABA <
Safety instructions
This safety instruction has to be kept on file for the whole lifetime
of the product and forwarded with the product.
- TRANSLATION OF THE ORIGINAL SAFETY INSTRUCTION -
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73432 Aalen
Tel. +49 7361 504-1370
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
Hersteller:
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
_____________________________________________
Anschlagpunkt starr G-ABA
Produktbezeichnung:
Folgende harmonisierten Normen wurden angewandt:
___________________ ___________________
DIN EN 1677-1 : 2009-03
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
___________________ ___________________
DGUV-R 109-017 : 2020-12
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Bereichsleitung MA
Aalen, den 06.05.2024
_____________________________________________
Name, Funktion und Unterschrift Verantwortlicher
DIN EN ISO 12100 : 2011-03
G-ABA
galvanised
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Germany
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
_____________________________________________
Lifting point rigid G-ABA
The following harmonized norms were applied:
___________________ ___________________
DIN EN 1677-1 : 2009-03
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
The following national norms and technical specifications were applied:
___________________ ___________________
DGUV-R 109-017 : 2020-12
___________________ ___________________
___________________ ___________________
___________________ ___________________
___________________ ___________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
Hermann Kolb, Head of division MA
Aalen, 06.05.2024
_____________________________________________
Name, function and signature of the responsible person
EN
DIN EN ISO 12100 : 2011-03
G-ABA
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RUD G-ABA
Summary of Contents for RUD G-ABA
- Page 1 ___________________ ___________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen Hermann Kolb, Bereichsleitung MA Hermann Kolb, Head of division MA Aalen, den 06.05.2024...
-
Page 2: Safety Instructions
• RUD weld-on lifting points G-ABA must not be used the G-ABA. with aggressive chemicals such as acids, alkaline • The stated WLL at the G-ABA must not be excee- solutions and their vapours. ded. • The reuse of cut-off G-ABAs is not permitted. - Page 3 • Check frequently and before each initial operation • Check finally the correct assembly (see chapter 4 the whole weld-on lifting point G-ABA in regard of Inspection / repair / disposal). linger ability as a lifting mean, regarding corrosion, wear, deformation etc.
- Page 4 • Avoid damage of lifting means resulting from sharp edges. inspection by the user • If the weld-on lifting point G-ABA are used exclusi- • Completeness of the lifting point vely for lashing, the value of the working load limit •...
- Page 5 Table 2: WLL overview WLL Y = Nominal Working Load ( ) = WLL X planar to the ring Example G-ABA 2.5 t | 2-leg 0-45° (see Table 2): = Loading at ring plane WLL x Factor: 2.5 t x 1.4 = 3.5 t...
- Page 6 Type WLL [t] weight Ref.No. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg/pc.] G-ABA 41,5 0,55 kg 7913870 G-ABA 1,36 kg 7913871 2,5 t G-ABA 27,5 71,5 2,93 kg 7913872 Table 5: Dimensioning Subject to technical alterations out of the ring planar...
Need help?
Do you have a question about the G-ABA and is the answer not in the manual?
Questions and answers