Table of Contents
Advertisement
Quick Links
> Chain Block <
VCB
User manual
This user manual has to be kept on file
for the whole lifetime of the product.
Translation of the original user instructions
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
Produktbezeichnung:
Anschlagkettengehänge Gk10 VIP
_____________________________________________
ND 4-28 mm, verkürzbar und unverkürzbar
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN 1677-3 : 2008-06
_________________
DIN EN 818-1 : 2008-12
_________________
DIN EN 818-4 : 2008-12
_________________
DIN EN ISO 12100 : 2011-03
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
DIN 15429 : 1978-07
_________________
DIN 5692 : 2011-04
_________________
PAS 1061 : 2006-04
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, Funktion und Unterschrift Verantwortlicher
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
_________________
DIN EN 1677-2 : 2008-06
_________________
DIN EN 1677-4 : 2009-03
_________________
DIN EN 818-2 : 2008-12
_________________
DIN EN 818-6 : 2008-12
_________________
_________________
DIN 15428 : 1978-08
_________________
DIN 5688-3 : 2007-04
_________________
DIN 685 : 1981-11
_________________
_________________
Chain Block
VIP-Chain-Block
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
Chain sling Grade 100 - VIP
_____________________________________________
ND 4-28 mm, adjustable/not adjustable
The following harmonized norms were applied:
_________________
DIN EN 1677-1 : 2009-03
_________________
DIN EN 1677-3 : 2008-06
_________________
DIN EN 818-1 : 2008-12
_________________
DIN EN 818-4 : 2008-12
_________________
DIN EN ISO 12100 : 2011-03
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
DIN 15429 : 1978-07
_________________
DIN 5692 : 2011-04
_________________
PAS 1061 : 2006-04
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
VCB
_________________
DIN EN 1677-2 : 2008-06
_________________
DIN EN 1677-4 : 2009-03
_________________
DIN EN 818-2 : 2008-12
_________________
DIN EN 818-6 : 2008-12
_________________
_________________
DIN 15428 : 1978-08
_________________
DIN 5688-3 : 2007-04
_________________
DIN 685 : 1981-11
_________________
_________________
VCB
EN
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RUD VCB
Summary of Contents for RUD VCB
- Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) _____________________________________________ Aalen, den 26.09.2016 Dr.-Ing.
- Page 2 100/VIP • The chain block VCB must only be used by designated and trained persons by respecting the DGUV 100-500 (BGR 500) and outside Germany the corresponding country specific re- Swivel adapter gulations.
- Page 3 Please inspect all chain blocks VCB before each use. • RUD components have been designed as per DIN EN 818 and DIN EN 1677 for a dynamic load of 20,000 load cycles. •...
- Page 4 HINT Make sure that lifting of loads with the excavator hook will not cause damages at the chain block. * The Excavator hook is optional available for the size VCB-22. Pic. 8: Max. gap „S“ • Reduction of cross section by more than > 10 %...
- Page 5 WLL chart • In addition to the inspection of the chain block, observe chain regarding wear at the rounding and bearing area. • Observe user instruction of the RUD Grade 10 Sling Chain Loading 0-7° >7°-20° >20°-45° (RUD Ref.-No.: 710164) for all used lifting means (chain, hooks, angle β:...
Need help?
Do you have a question about the VCB and is the answer not in the manual?
Questions and answers