If the equipment is disassembled for a long time, installed
without power, or the device is not installed properly after
debugging, it will affect the sealing, potentially causing
the equipment to condensate.
Please read this document before installing the device and
strictly observe the guidance when using the device.
When installing this device in a public space follow
Information Commissioner's Office (ICO) guidance
regarding CCTV signage. Failure to correctly use electrical
products may cause fire and severe injuries.
•
Strictly observe installation requirements when
installing the device. The manufacturer shall not be
held responsible for damage caused by users non-
conformance to those requirements.
•
Strictly conform to local electrical safety standards
and use power adaptors that are marked with the
LPS standard when installing and using this device.
Otherwise, this device may be damaged.
•
Use accessories delivered with this device. The
voltage must meet input voltage requirements for
this device.
Knight Eye 10
Install Guide
•
If this device is installed in place with unsteady
voltage, ground this device to discharge high
energy such as electrical surges to prevent the
power supply from burning out.
•
When this device is in use, ensure that no water
or liquid flows into the device. If it does,
immediately power off the device and disconnect
all cables (such as power cables and network
cables).
•
Do not focus strong light (such as light bulbs or sunlight)
on this device. Otherwise, the service life of the image
sensor may be shortened.
•
If this device is installed in places where thunder and
lightning frequently occur, ground the device nearby to
discharge high energy such as lightning strikes to
prevent device damage.
•
Avoid heavy loads, intensive vibration, and soaking to
prevent damage during transportation and storage. The
warranty does not cover any device damage that is
caused during secondary packaging and transportation
after the original packaging is taken apart.
•
Fix the device securely out of reach of mechanical
damage and keep the device away from magnetic field
interference. Do not install the device on moving
surfaces or in locations subject to shock waves.
•
Clean the device with a soft dry cloth. For stubborn dirt,
dip the cloth into diluted neutral cleanser, gently wipe the
dirt with the cloth, and then dry the device.
•
Do not jam the ventilation opening. Follow the installation
instructions provided in this document when installing the
device.
•
Keep the device away from heat sources such as
radiators, electric heaters, or other heated equipment.
•
Keep the device away from moist, dusty, extremely hot,
or cold places, and away from strong electro-magnetic
radiation.
•
If the device is installed outdoors, take insect and
moisture proof measures to avoid circuit board corrosion
that can adversely affect camera performance.
•
Remove the power plug if the device is not used for a
long period of time.
•
Before unpacking, check whether the fragile sticker is
damaged. If the fragile sticker is damaged, contact
customer services. The manufacturer shall not be held
responsible for any third-party damage to the fragile
sticker.
•
All complete products sold by the manufacturer are
closely inspected and delivered with product labelling,
quick setup guide and accessories. The manufacturer
shall not be held responsible for counterfeiting of its
products.
•
The manufacturer will update this manual according to
product function enhancement or changes and will
regularly update the software and hardware described in
this manual. Updated information will be added to new
versions of this manual without prior notice.
•
This manual may contain misprints, technical information
that is not sufficiently accurate, or product function and
operation description that is slightly inconsistent with the
actual product, with the final interpretation determined by
the manufacturer as standard.
•
This manual is only for reference and does not ensure
that the information is totally consistent with the actual
product. If there is a variance, refer to the actual product
for consistency.
Need help?
Do you have a question about the Knight Eye 10 and is the answer not in the manual?
Questions and answers