Page 2
CH1 Display Anti cable-pulling loop Display DC power input socket Sync window Audio output (balanced) Control button Mixed audio output (unbalanced) Control button BNC antenna input port Power switch...
Page 3
Microphone pickup module Display Microphone handle iR Sync window Select button Set button Battery compartment Frequency(MHz) Charging contacts -12dB Power switch...
Page 4
Power switch iR Sync window Audio input socket Display Antenna output socket (SMA) Clamp Select button Charging contacts Set button Battery switch TX antenna Battery compartment...
Page 6
Use a power adapter that complies with local regulations...
Page 13
-15dB Short press +5dB Input Gain RF Power Long press Short press TX Lock Medium Language High Frequency(MHz) Frequency(MHz) -12dB TX Reset -12dB Exit Chinese English - 1 5 d B Short . . . press + 5 d B Long press Input Gain RF Power...
Page 14
UR-280 Short press [ ON Long press [ OFF ] UH-280 Short press [ ON Long press [ OFF ] Frequency(MHz) -12dB Frequency(MHz) -12dB UT-280...
Page 15
Long press [ When searching for a channel, the frequency changes simultaneously according to the channel. 0 grid on the RF indicates the frequency is clean. If not, please repeat this operation.
Page 16
Short [ SYNC ] <15cm (6 in) UT-280 UH-280 Note: When iR infrared binding, the handle of the handheld microphone must be unscrewed. Otherwise, the binding function will be affected.
Page 17
Frequency(MHz) -12dB UT-280 UH-280 Both receiver and transmitter display are in the same frequency...
Need help?
Do you have a question about the UR-280 and is the answer not in the manual?
Questions and answers