Indicator Activity During Drive Operation; Table 3: Drive Status And Indicator Activity - Freecom DLT VS-80 Installation And Operation Manual

3.2.1.2

Indicator Activity During Drive Operation

When your DLT-VS80 is in use, a variety of indicator LEDs can blink or be illuminated.
Table 3 describes the circumstances under which one or more indicators are illuminated or
blinking immediately after POST. Table 4 describes what each front panel indicator means.
Drive Status
Power to drive
No power to drive
The drive detected an unrecoverable
hard error condition
The drive detected a recoverable
read/write error

Table 3: Drive Status and Indicator Activity

Indicator Activity
The Ready LED is on
The Ready LED is off
The Drive Error LED in on
The Clean/Media LED blinks
3-3