Jabra Evolve2 Buds USB-C UC Faq

Jabra Evolve2 Buds - USB-C UC
How do I pair my Jabra Evolve2 Buds with my mobile device?
To pair your Jabra Evolve2 Buds with your handheld mobile device or
tablet, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, with the earbuds out of the charging case,
simultaneously press and hold (3 seconds) the Left and Right
buttons. The LEDs on both earbuds will turn green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LEDs on the earbuds
flash blue. The earbuds are now ready to pair with your mobile
device.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Evolve2 Buds from the list. Enter "0000" (four zeros) if you
are asked for a PIN.
Note
If you want to use just one earbud, you must still pair both earbuds with
your mobile device. After the pairing, you can place one of the earbuds in
https://www.jabra.com/en-hk/supportpages/jabra-evolve2-buds/20797-989-
899/faq/81b444fb-0774-49cb-9c46-0d4da4f57b41
14/03/2025 02:53
Page 1 of 2