F-Secure Psb Workstation Security Remote Installation - F-SECURE PSB Administrator's Manual

18 | F-Secure PSB Administrator's Guide | Installing F-Secure PSB Workstation Security

F-Secure PSB Workstation Security remote installation

This section explains how to remotely install F-Secure PSB Workstation Security.
Before you start the remote installation, make sure that the domain controller exists and that the computers
on which you want to install the software belong to a domain. To be able to remotely install the software, you
must have domain administrator rights.
To install the software:
1. Log in to the F-Secure PSB Portal.
Enter the user name and password, which you selected when you created your account.
The Protection status page of the new account opens.
2. Click the
The Download software page opens.
3. In the Download software page, click the
downloaded the workstation software yet, click also
4. Extract the Remote Installation Tool zip file on a local drive.
5. Double-click the ritool.bat file.
The F-Secure Remote Installation Tool window opens.
6. In the Software to Install page, click
The Software Installer Selection window opens.
7. Locate the downloaded workstation software file and click OK.
8. Click Next.
9. In the Target Computers page, do the following:
a) Under
b) Under
10. Click Next.
11. In the Account page, do the following:
a) Select
b) Enter the domain administrator name and password.
c) Confirm the password.
12. Click Next.
13. Click Install.
The workstation software is being installed on the selected computers.
In the F-Secure PSB portal, verify that the computer shows in the portal.
Download software link at the top of the page.
Domain Name, select the domain to which the computers belong.
Computer Name, select the computers on which you want to remote install the software.
Another account.
Download the Remote Installation Tool
theDownload the workstation software
.
link. If you have not
link.