Setting A Default Profile; Resetting Default Profiles - F-SECURE PSB Administrator's Manual

44 | F-Secure PSB Administrator's Guide | Administering the product

Setting a default profile

You can set your own default profiles for remote computers.
You can set default profiles separately for workstations and servers. These profiles are applied to new
computers that you add to the system. If you do not set any default profiles, the system default profiles are
applied to computers.
To set a default profile:
1. On the Security Profiles page, click
2. Select a profile that you want to set as the default profile.
3. Select whether you want to set the profile as a default profile for servers or workstations.
To do this, select one of the following options:
• Default profile for workstations
• Default profile for servers
4. Click Update.
In the Default profiles column, you can view the profiles that you selected as the default profiles. They are
applied to new computers that you add to the system.

Resetting default profiles

If you have set your own default profiles for remote computers, but you want to restore the system default
profiles, reset the default profiles.
To reset the default profiles:
1. On the Security Profiles page, click
2. Click Reset default
Your own default profiles are cleared from the Default profiles column, and the system default profiles are
shown instead. The system default profiles are applied to new computers that you add to the system.
Set default
Reset default
profiles.
profiles.
profiles.