F-SECURE CLIENT SECURITY 7.00 Getting Started Manual page 26

25 CHAPTER 3
indicating the verification of the installation package. The
verification may take a few minutes.
8. Open Tools
the packet on the list is OK (if the status is not OK, please
reinstall). When the status is OK, setup is complete.
Remote Deployment of Other F-Secure Products
F-Secure Policy Manager can install software to new hosts that
are not yet under centralized management. These hosts can be
browsed from Windows NT domains using the Autodiscover
Windows Hosts feature. The software is then push installed to the
managed hosts.
F-Secure Policy Manager offers other methods of installing and
updating managed applications. Shortcuts to all the
installation-related features are gathered in the Properties pane
under the Installation tab. Please see the F-Secure Policy
Manager Administrator's Guide for details.
The following steps are for both the Advanced Mode and
Anti-Virus Mode user interface:
1. In F-Secure Policy Manager, select the policy domain
containing the hosts to which you will install.
2. Open the Edit menu and select Autodiscover Windows
Hosts (alternatively, click the
If the verification does not start, go to
Installation Packages
installation package is listed.
Installation Packages. Check that the status of
For Windows 98/ME hosts, you must enable remote
installation for this installation to work. See the F-Secure
Policy Manager Administrator's Guide for more
information.
Tools
and check to see that the
button). From the NT