F-SECURE CLIENT SECURITY 7.00 Getting Started Manual page 24

23 CHAPTER 3
11. Specify the F-Secure Policy Manager Server address, and
Administration port number. Click Next to continue.
12. Select to add product installation package(s) from the list of
available packages (if you selected F-Secure Installation
Packages in step 6 ).
13. Setup displays the components that will be installed. Click
Start to start the installation.
14. After setup has copied the files to your computer, click Finish
to complete the setup.
When using a connection over a network, please consider
securing the communication with F-Secure SSH or
F-Secure VPN+.
For environments requiring maximum security, see
section Installing F-Secure Policy Manager in High
Security Environments in F-Secure Policy Manager
Administrator's Guide
Web Reporting module is used for communication with
F-Secure Policy Manager Web Reporting. Web Reporting
uses a local socket connection to the Admin module to
fetch server data. The default port is 8081.
By default access to Web Reports is allowed also from
other computers. If you want to allow access only from this
computer, select Restrict access to the local machine.
Depending on the installation method, the server
address and port number are not always required.
To determine if your server-side installation was
successful, open a web browser in the machine where
F-Secure Policy Manager Server was installed, enter
http://localhost and press Enter. If the server installation