Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG TR9W80699
Summary of Contents for AEG TR9W80699
- Page 1 EN User Manual | Tumble Dryer TR9W80699 aeg.com\register...
-
Page 2: Table Of Contents
Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the AEG manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual. -
Page 3: Safety Information
SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: General Safety
• Keep children and pets away from the appliance when the door is open. • If the appliance has a child safety device, it should be activated. • Children shall not carry out cleaning and user maintenance of the appliance without supervision. 1.2 General Safety •... - Page 5 • Connect the mains plug to the mains socket only at the end of the installation process. Make sure that the mains plug is accessible after installation. • Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of unwanted gases into the room from appliances burning gas or other fuels, including open fires.
-
Page 6: Safety Instructions
• Fabric softeners, or similar products, should only be used as specified by the product manufacturer’s instructions. • Remove all objects from items that could be a source of fire ignition such as lighters or matches. • WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. -
Page 7: Internal Lighting
• Clean the appliance with a moist soft cloth. Use only neutral detergents. Do not Warning: Risk of fire / Flammable use abrasive products, abrasive cleaning materials. The appliance contains flammable pads, solvents or metal objects. gas, propane (R290), a gas with a high level •... -
Page 8: Product Description
• Concerning the lamp(s) inside this product • Disconnect the appliance from the mains and spare part lamps sold separately: electrical and water supplies. These lamps are intended to withstand • Cut off the mains electrical cable close to extreme physical conditions in household the appliance and dispose of it. - Page 9 Get usage advice, troubleshooting, service and repair information (also available at aeg.com/ support ) • Buy accessories, Consumable and Original Spare parts for you appliance (also available at aeg.com/ shop ) 3.1 Electrical connection The power supply cable must be easily accessible after installing the appliance.
-
Page 10: Technical Data
4. TECHNICAL DATA Height x Width x Depth 85,0 x 59,6 x 66,3 cm Max. depth with the appliance door open 110,8 cm Max. width with the appliance door open 95,8 cm Adjustable height 85,0 cm (+ 1,5 cm - feet regulation) Drum volume 118 l Maximum load... - Page 11 Options Fernstart button Ein/Aus button with Low Power function Fertig In button Start/Pause button SyncDry button 5.1 Display Symbol on the display Symbol description cycle time indication maximum load finish in selection (up to 24h) wireless connection remote control Check APP notification Knitterschutz option on child lock on laundry dryness: iron dry, cupboard dry, extra dry...
-
Page 12: Wi-Fi - Connectivity Setup
Symbol on the display Symbol description check the condenser indicator: ECO mode drying drying phase indicator: cooling phase indicator: crease guard phase indicator: Fertig In option on ProSense indicator maximum load exceeded indicator: WI-FI - CONNECTIVITY SETUP 6.1 QR code on rating plate This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to a mobile device. -
Page 13: Wireless Connection Configuration
Make sure that your smart device is To switch off the wireless connection, connected to the wireless network. touch and hold down Fernstart button until you hear a single 'click' sound. The symbol: 1. Go to the App Store on your smart device appears on the display. -
Page 14: Over-The-Air Update
The related led comes on and the related During the update, the appliance shows icon appears on display. in the display. The appliance will be usable again at the end of the update, without any notification about If you set a programme via App and it successful update. - Page 15 Programme names are subject to change depending on market requirements without notice. Our app will give you a complete description of each programme. Sportswear Curtains Denim Training Gear Pillow Silk Soccer/Rugby Towels Baby Skiing Gear Pet Hair Linen Running Shoes Easy Iron Drying Rack Anti-Allergy...
- Page 16 Load 1) Properties / Fabric mark 2) Programme Gently dries for machine and hand-washable woollens. Remove immediately the items when the programme is completed. 1,0 kg Wolle The wool drying cycle of this machine has been tested and ap‐ proved by The Woolmark Company. The cycle is suitable to dry wool garments which are labelled “hand wash”...
- Page 17 Load 1) Properties / Fabric mark 2) Programme An automatic programme that precisely dries even the internal insulation of jackets with 2,0 kg feather, down, or synthetic filling. Maintains Daunenjacken garment appearance and thermal functionality The maximum weight refers to dry items. DAILY USE: Preparing the laundry.
-
Page 18: Options
8. OPTIONS 8.1 Trockengrad 4. Touch the Start/Pause button repeatedly until you reach the desired target final moisture . This option helps to achieve requested laundry dry‐ ness. You can select the level of dryness: Dryness level Display symbol ready to iron - iron dry level maximum dry‐... -
Page 19: Favourite Programmes
The acoustic signal sounds at the following: programme data via the home router Wi-Fi to • cycle end the AEG Cloud, as well as to your tumble • start and end of crease guard phase dryer. The acoustic signal is by default always on. -
Page 20: Settings
4. Display will update itself automatically with the suggested programme. After 10 seconds, if data retrieving is unsuccessful, the button LED is switched When SyncDry programme is set, user off and the machine gives an acoustic is still allowed to change options or select error signal. -
Page 21: Before First Use
3. Press and hold the Leise and Knitterschutz buttons for some seconds. If the procedure does not work (this could 4. The appliance will acknowledge the be due to timeout or wrong keys operation by displaying combination), switch the appliance off and repeat the sequence from the beginning. -
Page 22: Daily Use
Working pump and transferring condensation to the tank. 11. DAILY USE 11.1 Preparing the laundry • Remove all items from pockets. • Turn items with the internal layer made of cotton inside out. Cotton layer must be faced outwards. Loading the drum up to the maximum •... -
Page 23: Loading The Laundry
Fabric label Description Laundry is not suitable for tumble drying. 11.2 To achieve best drying results 11.4 Turning on the appliance • The selected programme must be adequate to the type of dried clothes. • The filter must be clean. Clogged filter makes drying inefficient. -
Page 24: Setting A Programme
11.6 Setting a programme You can activate the child lock option: • before you touch the Start/Pause button - the appliance cannot start • after you touch the Start/Pause button - programs and option selection is unavailable. Child lock option activation: Use the programme dial to set the programme. -
Page 25: Program Change
11.10 Starting a programme with 11.11 The ProSense load detection Fertig In The ProSense technology detects the laundry load size defining the programme This option allows choosing the time at duration. Works with most of the which a programme should terminate. programmes. -
Page 26: Hints And Tips
11.13 Programme end • Room temperature is too low or too high. Optimal room temperature is between 18°-25°C. Clean the filter and drain the water container after each drying cycle. (See Leave the door slightly opened after chapter CARE AND CLEANING.) every cycle to avoid moisture. -
Page 27: Care And Cleaning
13. CARE AND CLEANING 13.1 Periodic cleaning schedule If the appliance is not used for a long time unplug the appliance. Periodic cleaning helps to extend the life of your appliance. Indicative periodic cleaning schedule: Cleaning the filter When the indicator flashes Empty the water container When the indicator... -
Page 28: Emptying The Water Container
3. Gather lint with hand from both internal 13.4 Emptying the water container parts of the filter. Empty the condensed water container after each drying cycle. If the condensed water container is full, the programme stops automatically. The Behälter symbol comes on the display and you must empty the water container. -
Page 29: Cleaning The Condenser
13.5 Cleaning the condenser 3. Turn the lever to unlock the condenser lid. Kondensator flashes on the If the symbol display, inspect the condenser and its compartment. If it is dirty, clean it. Do the check not less than once a 6 months. WARNING! Do not touch the metal surface with bare hands. -
Page 30: Troubleshooting
lifters. Dry the cleaned surfaces with a soft Use a moist cloth to clean. Dry the cleaned cloth. surfaces with a soft cloth. CAUTION! CAUTION! Do not use abrasive materials or steel Do not use furniture cleaning agents or wool to clean the drum. cleaning agents which can cause corrosion. - Page 31 14.2 Troubleshooting Problem Possible cause Remedy The tumble dryer is not connected to the Connect it to the mains socket. Check the mains supply. fuse in the fuse box (domestic installation). The door is open. Close the door. The tumble dryer does not operate.
- Page 32 Problem Possible cause Remedy The load size is small. Select a time program. The time value must be related to the load. To dry one item or a small amount of laundry we recommend The drying cycle is short drying times. too short.
-
Page 33: Consumption Values
15. CONSUMPTION VALUES 15.1 Introduction The user manual reports two different references for EU energy label and ecodesign regulations. • Reg. (EU) 932/2012 and Reg. (EU) 392/2012 valid up to 30 June 2025 is relate to the Energy efficiency classes from A+++ to D. •... - Page 34 Initial Energy con‐ Target final Load Spun at mois‐ Drying time Programme sumption Moisture (kg) (rpm) ture (h:mm) (kWh) 1) 2) 1000 3:19 1,68 1) 2) 1000 1:50 0,86 This is the reference programme used to assess the compliance with EU ecodesign and Energy label regula‐ tions, Reg.
-
Page 35: Warranty - Australia And New Zealand
Electrolux may, in its absolute serviced centres; discretion, choose whether the remedy d) ‘AEG’ is the brand controlled by offered for a valid warranty claim is repair Electrolux Home Products Pty Ltd of or replacement. Electrolux or its ASC may 163 O’Riordan Street, Mascot NSW... - Page 36 7. Exclusions: You may not make a claim 8. How to claim under this warranty: To under this warranty unless the defect enquire about claiming under this claimed is due to faulty or defective parts warranty, please follow these steps: or workmanship.
-
Page 37: Environmental Concerns
SERVICE AUSTRALIA aeg.com/au FOR SERVICE FOR SPARE PARTS or to find the address of your nearest authorised serv‐ or to find the address of your nearest spare parts centre ice centre in Australia in Australia PLEASE CALL 1300 363 664... - Page 40 The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)
Need help?
Do you have a question about the TR9W80699 and is the answer not in the manual?
Questions and answers