Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung Galaxy A13 5G
Summary of Contents for Samsung Galaxy A13 5G
- Page 1 Galaxy A13 5G Repair Training SM-A136U...
- Page 2 What are we learning? What components make up the Galaxy A13 5G? How do you properly disassemble the device during repair? How do you ensure the device is correctly assembled after a repair is complete? What tools are required during repair? How do I validate my repair? This training will explore how to provide expert repairs on the Galaxy A13 5G.
-
Page 3: Hardware Components
Galaxy A13 5G Hardware Components Removable Parts of the Galaxy A13 5G... -
Page 4: Removable Parts
Removable Parts Galaxy A13 5G has multiple removable parts. Being able to identify the parts and understand their functions will assist you in diagnostics and repair of the device. The Parts Include: • On-Cell Touch Assembly (OCTA) / Front Assembly •... - Page 5 On-Cell Touch Assembly (OCTA) Galaxy A13 5G OCTA includes the following: • The Display Panel • The Front Glass and Laminate • Speaker • Battery Front Back...
- Page 6 Main PBA The Main PBA is the main board of the device. It contains the most essential components of the device such as: • Mobile Chipset Front • Main Camera • Built in Storage • Sub Microphone • SIM Tray Socket Back...
- Page 7 Sub PBA The Sub PBA is the secondary board of the device. It contains other essential components of the device such as: • Main Microphone Back • USB Type-C Interface (I/F) Connector • Sub FPCB Connection Ports • Headphone Jack Front...
- Page 8 Components There are a few smaller components on the Galaxy A13 5G that can be removed. These are: • Main Cameras Front Facing Main Cameras Camera • Front Facing Camera • Vibrator Motor • mmWave antennas mmWave atennas Vibrator Motor...
-
Page 9: Rear Assembly
Rear Assembly The rear assembly rests between the back cover and circuitry boards. It will be broken down into two pieces. - Page 10 Battery The Battery is a Lithium-ion (Li-ion) cell and must be handled carefully. Improper removal can damage the cell, causing it to ignite and cause injury. Only hold the Battery from the center sides. Do not squeeze the Battery or use any unauthorized tools when handling it.
-
Page 11: Back Cover
Back Cover Galaxy A13 5G has a Back Cover that is clipped on to the frame. On the inner side of the Back Cover, is a flex connector that connects to the Main PBA. - Page 12 Galaxy A13 5G Steps for Disassembly Disassembly of the Galaxy A13 5G...
-
Page 13: Tools And Equipment
Tools and Equipment To ensure proper disassembly without damage to the device, use the proper tools and equipment: Tweezers Disassembly Stick Ceramic Scissors Ethylene Alcohol Suction Cup Screwdriver SIM Ejector Tool... - Page 14 Tools and Equipment To ensure proper disassembly without damage to the device, use the proper tools and equipment: ESD Wrist Strap Grounded Mat Anti-static Gloves...
-
Page 15: Electrostatic Discharge Precaution
Electrostatic Discharge Precaution You will disassemble the device in the following order: • Back Cover Rear Assembly • Main PBA • • Parts on the Main PBA • Main Camera • Front Facing Camera Sub PBA • Parts on the Bracket •... - Page 16 Electrostatic Discharge Precaution Before you begin to disassemble, make certain that all ESD precautions are met. This includes: • Wearing an ESD Strap which has passed all required tests Wearing Anti-static Gloves • • Working over a grounded mat ESD Wrist Strap Anti-static Mat Anti-static Gloves...
- Page 17 Swollen Battery Precautions A swollen Battery may cause a device to bulge. Before disassembling the device, make certain that there are no signs of Battery swelling. • If the device has a swollen Battery, DO NOT heat the device. • •...
- Page 18 Eject the SIM tray To prevent damage to the Main PBA, the SIM Tray must be removed before completing disassembly. The SIM Tray is located on the top of the device. Tool Required SIM Eject Tool...
-
Page 19: Remove The Back Cover
Remove the Back Cover The back cover will not be adhered to the frame. Instead, the back cover will be clipped to the device. To remove the back cover, use the disassembly stick’s tip to run along the sides of the device. This will allow the back cover to detach from the frame making it easy to remove. - Page 20 Remove the Back Cover cont… The back cover will be connected to the Main PBA via a flex connector. This connector must be disconnected before removing the back cover completely. Using the tweezers, remove the flex connector cover from the Main PBA and place to the side.
-
Page 21: Removing The Screws
Removing The Screws Using the screwdriver, remove 14 screws from the rear assembly. Tool Required Screwdriver... - Page 22 Removing the Rear Assembly To safely remove the rear assembly, use the tweezers to remove the top assembly. The entry point will be located at the top left. Once the top assembly is disconnected from the frame, remove and place to the side. Remove the bottom piece by inserting the tweezers at the bottom right.
- Page 23 Disconnecting the flex connectors Before removing the Main and Sub PBA, disconnect the Main to LCD connector from the Main PBA. Next, disconnect and remove the Front Facing Camera and place it to the side with the lens facing up. Work your down to the Sub PBA and disconnect the Sub PBA connector.
- Page 24 Removing the Main and Sub PBA With nothing connecting to the Main PBA and Sub PBA, both PBAs can now be removed. Gently lift the Main PBA from the frame and place to the side. Ensure that the Main Camera lens are facing up. Remove the Sub PBA by gently lifting and placing it to the side.
- Page 25 Disconnecting the Camera from the Main PBA To remove the Main Camera from the Main PBA, use the disassembly stick to disconnect the flex connectors. Once disconnected, place the camera to the side facing up to prevent damage to the lens. Tool Required Disassembly Stick...
- Page 26 Removing the Vibrator Motor To remove the Vibrator Motor from the frame, use the tweezers to insert the tip underneath the motor and gently lift. Once loose, remove and place to the side. Tool Required Disassembly Stick...
-
Page 27: Removing The Battery
Removing the battery If the Battery needs to be replaced, proper handling of the Battery is required. • Batteries are NOT to be reused and must be discarded as outlined in the Standard Operating Procedures (SOP). • To remove the Battery, apply some Alcohol to the Swab and apply Alcohol around the edges of the Battery. -
Page 28: Battery Management
Battery Management Using the Ceramic Scissors, cut the lead from the Battery and return to Samsung per U-Class procedure. Tool Required Ceramic Scissors... - Page 29 The device has now been disassembled We have covered the disassembly process of the Galaxy A13 5G . At this point, all removable components have been removed. Keep in mind: • In a repair scenario, only remove as much as required for the repair.
- Page 30 Galaxy A13 5G Assembly Assembly of the Galaxy A13 5G...
- Page 31 Tools and Equipment To ensure proper assemble without damage to the device, use the correct tools and equipment: Tweezers Disassembly Stick Screwdriver Anti-static gloves Anti-static Mat Press Jig Battery Pads...
-
Page 32: Steps Of Assembly
Steps of Assembly You will assemble the device in the following order: • Battery • Parts on the Bracket • Vibrator Motor & mmWave Modules • Parts on the Main PBA • Main Camera & Front Facing Camera • Main PBA •... -
Page 33: Installing The Battery
Installing the Battery Remove the film from the rear of the battery and gently place it on the bracket. Grab the battery press pads and place the device between the bottom and top pad ensuring the pad is covering the battery. - Page 34 Installing the Vibrator Motor Gently place the Vibrator Motor on the frame and press down gently for a few seconds to secure it in place.
- Page 35 Installing the Main Camera Align the Cameras onto the Main PBA without touching the lens and connect their connectors to the Main PBA. Turn the Main OBA sideways to ensure the connectors are flat and secure.
- Page 36 Installing the Main and Sub PBA Align the Main PBA onto the bracket; make sure to move any flex cables out of the way to ensure it lays flush (flat) in its place. Align the Sub PBA onto the bracket and insert starting with the interface port.
- Page 37 Installing the Rear Assembly Starting with the bottom piece, insert and ensure the bottom piece is clipped into place. Once installed, insert the top piece in place ensuring the ensuring it is secured in place. Inspect the rear assembly to ensure the rear assembly is resting flat and in place.
- Page 38 Attaching the Back Cover Place the Back Cover side-by-side with the device and connect the flex connector to the Main PBA. Once the connector is connected, cover the connector with it’s cover. Place the back cover over the rear and press the cover down on all sides.
- Page 39 Galaxy Diagnostics – Calibrations Launch Galaxy Diagnostics and perform Outgoing Quality Control (OQC) tests and calibrations to ensure that all components are functioning properly. Calibrations Galaxy A13 5G requires the following calibrations: • Multi Camera Calibration • mmWave RF Calibration...
- Page 40 Diagnostics, cont. Customer Pickup Perform one last visual inspection and return the device in the following condition: • Updated to the most recent firmware build • State of charge to 100% • Wiped clean using microfiber cloth to remove any fingerprints or debris...
Need help?
Do you have a question about the Galaxy A13 5G and is the answer not in the manual?
Questions and answers