Table of Contents
Advertisement
Setup Menu Options (Continued)
Options
Unable to receive TV signal.
Invalid channel has been memorized.
Signal is unstable in digital channel.
Current time is not set.
There is invalid info in program list.
PVR function does not work properly.
There is a bad sector on the HDD.
Settings status
S/W version
ote
Do you want to delete all program lists and initialize HDD? Initialization deletes all lists.
18
Troubleshooting
This feature informs you that there is a problem with the receiver and offers
solutions.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
Select the Troubleshooting using 3 3 / 4 4 then press
3 3
or 2 2 .
The troubleshooting options appear.
Select a troubleshooting option using 3 3 / 4 4 then press
4 4
or 2 2 .
Moves to the next step in the Troubleshooting menu.
Press MENU to return to the previous screen or press EXIT on the
5 5
remote control to return to TV viewing.
Function
(Use 3 3 / 4 4 to select desired option)
Automatically finds all channels (digital) available through the antenna inputs
(Refer to page 16).
You can erase channels from memory manually
(Refer to page 16).
Shows the antenna signal strength bar. If the signal strength is weak, the picture
may freeze or appear incomplete (Refer to page 17).
The Clock menu appears on the TV screen then set the clock manually
(Refer to page 20).
The message for disk initialization appears. If you want to initialize, select "Yes"
and then all programs will be deleted.
Shows the reason that PVR function does not work properly.
Shows the defective ratio when a bad sector on the HDD is detected.
Shows the current status of the receiver (Resolution, DTV Out, Audio and Ratio).
Shows the current software version applying to the receiver.
(SELECT) or 2 2 .
(SELECT)
(SELECT)
Advertisement
Table of Contents
Troubleshooting
