Download
Share
Print this page
Sceptre E249W User Manual
  1. Manuals
  2. Brands
  3. Sceptre Manuals
  4. Monitor
  5. E249W
  6. User manual
Sceptre E249W User Manual

Sceptre E249W User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE E24 Display User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the E249W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sceptre E249W

Summary of Contents for Sceptre E249W

  • Page 1: Safety Instructions

    - 1 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 2: Safety Instructions

    No naked flame sources, such as lighted candles, should be placed on the apparatus. 10. Operating environment: Temperature: 5°C~35°C, Humidity: 10% to 85% non- condensing, Altitude: 0~2,000 m. - 2 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 3: Important Information

    IMPORTANT INFORMATION - 3 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 4 The house icon identifies that this product is for indoor use. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. - 4 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 5: Safety Instructions

    Do not place the display on cloth or other materials that may be located sure of the type of power supplied to your home, consult your dealer or local power company. - 5 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 6 • power cord and contact your dealer Operating environment: Temperature: immediately. Do not try to repair the 5°C ~ 35°C, Humidity: 10% to 85% product yourself. non-condensing, Altitude: 0~2,000 m. - 6 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 7 Dear Sceptre Customer, Congratulations on your new SCEPTRE E24 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference.

  • Page 8: Opening The Package

    Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons.

  • Page 9: Installing The Monitor Stand Assembly

    Insert the neck into the base with the front of the neck facing the left at 45 degree angle and twice the neck counter-clockwise until you hear a click sound and the neck is facing forward aligned with the base. - 9 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 10 Make sure the wall is structurally safe for the weight of the display Make sure the wall mount kit is compatible with the display Read and follow all instructions provided by the wall mounting kit. Securely install all screws and connections. - 10 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 11: Removing The Stand For Wall Mounting

    The display’s mountain pattern is 100mm by 100mm using M4 x 10mm size screws. - 11 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 12: Table Of Contents

    Supported VGA Resolution ................24 Supported HDMI Resolution ................25 Troubleshooting .....................26 How do I clean the LED Monitor?..............29 Specification....................30 LIMITED PRODUCT WARRANTY..............31 Disclaimer, Trademarks, Icons & Copyright Information ........33 FCC Compliance Statement ................34 - 12 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 13: Identifying Front And Rear Panel

    Indicator Light: This light turns blue when the monitor is turned on and red when the monitor is turned off. The light will be off if the power adapter is removed from the back of the monitor. - 13 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 14: Back View With Buttons

    – When the OSD is active, this button acts as the EXIT button and exits out of the option or OSD. This button switches between all the different inputs of the display. – This button turns the display on or off. - 14 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 15: Back View With Connections

    AUDIO OUT – This connection is for audio out from the monitor going out to either a speaker or headphone. DC IN – This connection is for electricity supplied from the included power adapter. - 15 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 16: Connections

    3. Turn on the power of both the E24 LED MONITOR and the computer. Please Note: • The PC’s clearest picture is ran with 1920 x1080 at 60 Hz. - 16 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 17: If You Have Vga Connection On Your Video Card

    Turn on the power of both the E24 LED MONITOR and the PC. Please Note: • The PC’s clearest picture is ran with 1920 x1080 at 60 Hz. - 17 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 18: On Screen Display (Osd) Menu

      option you want to adjust. Use the buttons to adjust each option’s values. When you want to exit press the button. - 18 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 19: Quick Start

    – This display mode filters out blue light for users who want blue light protection. ADAPTIVE SYNC – This option enables the monitor to dynamically adjust the vertical refresh rate to the frame rate of the graphics card. - 19 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 20: Picture

    – This option lets the user adjust the aspect ratio of the monitor. FULL – This option automatically stretches any picture to the full screen regardless of picture proportion. – This option forces any resolution to a 4:3 square format. - 20 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 21 V. POSITION – This option adjusts the vertical position of the image. CLOCK – This option adjusts the picture clarity by large increments. PHASE – This option adjusts the picture clarity by small increments. - 21 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 22: Color

    – This option adjusts the tint of the entire monitor. SATURATION – This option adjusts the color saturation of the entire monitor. BLUE LIGHT SHIFT – This display mode filters out blue light for users who want blue light protection. - 22 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 23: System

    – This option adjusts the opacity of the OSD menu. VOLUME – This option allows users to change the output level of the audio out port. RESET – This option resets all values of the menu back to factory default. - 23 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 24: Supported Vga Resolution

    1280 x 768 @ 60Hz, 75Hz 1280 x 720 @ 60Hz, 75Hz 1280 x 600 @ 60Hz, 75Hz 1152 x 864 @ 60Hz, 75Hz 1024 x 768 @ 60Hz, 75Hz 800 x 600 @ 60Hz, 75Hz - 24 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 25: Supported Hdmi Resolution

    1280 x 720 @ 60Hz 1152 x 864 @ 60Hz 1024 x 768 @ 60Hz, 75Hz 1024 x 600 @ 60Hz 800 x 600 @ 60Hz, 75Hz *Specifications are subject to change without notice. - 25 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 26: Troubleshooting

    Please remember to make sure your refresh rate should be at 60Hz. I CAN’T OPEN THE You need to have a valid video signal going through the monitor before you can turn on the OSD. - 26 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 27 OSD. Look for RESET under the OTHER options. I CHANGED MY Open the OSD, under OTHER, select RESET to reset all COLOR SETTINGS values back to factory default. NOW I CAN’T GET THE FACTORY DEFAULT BACK. - 27 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...
  • Page 28 In there you can change the size of the words by changing from the option DEFAULT SCALE to LARGE SCALE. Click on APPLY to finalize your selection. Once you have finished rebooting, the computer is ready for use. - 28 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 29: How Do I Clean The Led Monitor

    Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. - 29 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 30: Specification

    Preset Picture Mode RTS, FPS Preset Game Mode Available Blue Light Shift VGA, HDMI (HDCP supported) FCC, cETLus, ISTA 6, HDMI, Energy Star Compliance *Specifications are subject to change without notice. - 30 - www.SCEPTRE.com SCEPTRE E24 Display User Manual...

  • Page 31: Limited Product Warranty

    (SCEPTRE reserves the right to determine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect;...
  • Page 32 Dead Pixel Policy SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.

  • Page 33: Disclaimer, Trademarks, Icons & Copyright Information

    SCEPTRE is a trademark or registered trademark of Sceptre Group. • Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

This manual is also suitable for:

E24