Table of Contents
Advertisement
Quick Links
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been engineered
and manufactured with the highest priority on safety. However, improper use can result
in electric shock and / or fire. In order to prevent potential danger, please observe the
following instructions when installing, operating, and cleaning the product. To ensure
your safety and prolong the service life of your Liquid Crystal Display, please read the
following precautions carefully before using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade and
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
www.SCEPTRE.com
SCEPTRE K25 Display User Manual
Advertisement
Table of Contents
Related Manuals for Sceptre E255B-FWD240
Summary of Contents for Sceptre E255B-FWD240
-
Page 1: Safety Instructions
- 1 - www.SCEPTRE.com SCEPTRE K25 Display User Manual... - Page 2 No naked flame sources, such as lighted candles, should be placed on the apparatus. 10. Operating environment: Temperature: 5°C~35°C, Humidity: 10% to 85% non- condensing, Altitude: 0~2,000 m. - 2 - www.SCEPTRE.com SCEPTRE K25 Display User Manual...
- Page 3 SAFETY INSTRUCTIONS - 3 - www.SCEPTRE.com SCEPTRE K25 Display User Manual...
-
Page 4: Important Information
The house icon identifies that this product is for indoor use. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to https://www.P65Warnings.ca.gov. - 4 - www.SCEPTRE.com SCEPTRE K25 Display User Manual... - Page 5 Do not place the display on cloth or sure of the type of power supplied to other materials that may be located your home, consult your dealer or local power company. - 5 - www.SCEPTRE.com SCEPTRE K25 Display User Manual...
- Page 6 • power cord, and contact your dealer Operating environment: Temperature: immediately. Do not try to repair the 5°C ~ 35°C, Humidity: 10% to 85% product yourself. non-condensing, Altitude: 0~2,000 m. - 6 - www.SCEPTRE.com SCEPTRE Display User Manual...
- Page 7 To ensure safety and many years of trouble-free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
-
Page 8: Opening The Package
Opening the Package The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening, it is recommended that the display package must be handled by a minimum of 2 or more persons. -
Page 9: Installing The Monitor Stand Assembly
Obtain the neck and base piece. Connect the neck to the base piece. Secure the base by inserting and tightening the base screw from the bottom of the base. - 9 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 10 Insert the neck into mounting on the back of the monitor and secure the installation by inserting and tightening the 2 neck screws. - 10 - www.SCEPTRE.com SCEPTRE Display User Manual...
- Page 11 If you are placing the display on a stand, we would recommend you use a display safety strap (not included) in order to minimize the possibility of the display toppling over. Securely install all screws and connections. - 11 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 12: Preparing The Monitor For Wall Mount
Please remove the neck plate from the monitor. Once removed, please look for four screw holes marked below in red. Please install the (4) Wall-mount spacers in these screw holes. - 12 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 13 Align the Wall-Mount Plate that is included with your monitor. Screw in the plate with the provided Wall-Mount screws. 75mm 75mm The mount specification is 75mm x 75mm using M4 screws. - 13 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 14: Table Of Contents
How do I detach the DisplayPort Cable? ..........35 How do I clean the LED Monitor? ............36 Specification ..................37 LIMITED PRODUCT WARRANTY ............. 39 Disclaimer, Trademarks, Icons & Copyright Information ....40 FCC Compliance Statement ............... 41 - 14 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 15: Identifying Front And Rear Panel
Indicator Light –The light is blue when the monitor is turned on. The light is red when the monitor is turned off but plugged into power. The light is flashing blue when there is no signal given to the monitor. - 15 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 16: Rear View
Rear View - 16 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 17: Panel Tilt Adjustment
Panel Tilt Adjustment The screen can be adjusted by inclining forward and backward; however, the specific adjustment depends on the specific model of the device. Generally, it may be inclined 5°±1°forward and 15°±2° backward. - 17 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 18: Rear View With Buttons
With the OSD turned on, this button moves the selection upwards. – With no OSD, this button will also decrease the volume of the internal speaker. With the OSD turned on, this button moves the selection downwards. - 18 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 19: Rear View With Connections
DP 1 – Display port is a digital video connection for connection to computers with display port video output. The DisplayPort version is 1.4. AUDIO OUT (3.5mm Mini-jack) – This connection is for audio out from the monitor to multimedia speakers or headphones. - 19 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 20: Connections
3. Turn on the power of both the K25 LED MONITOR and the computer. Please Note: Make sure to set audio output from your computer to PCM output. This connection supports up to 240Hz refresh rate. - 20 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 21: If You Have Displayport Connection On Your Video Card
PC. Connect the other end of the cable to your K25 LED MONITOR’s audio in. 4. Turn on the power of both the K25 LED MONITOR and the computer. Please Note: This connection supports up to 240Hz refresh rate. - 21 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 22: On Screen Display (Osd) Menu
M button to select the option buttons to adjust each option’s values. When you you want to adjust. Use the want to exit, press the E button. - 22 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 23: Quick Start
This option automatically stretches any picture to the full screen regardless of picture proportion. 16:9 – This option forces any resolution to a 16:9 square format. DOT BY DOT – This option displays the resolution exactly as is. - 23 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 24 BLUE LIGHT SHIFT – Adjusts the blue light value to reduce strain on eyes. FREESYNC – This option turns on or off AMD FreeSync function, enabling smoother gameplay. - 24 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 25: Picture
This option automatically stretches any picture to the full screen regardless of picture proportion. 4:3 – This option forces any resolution to a 4:3 square format. DOT BY DOT – This option displays the resolution exactly as is. - 25 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 26 SHARPNESS – This option changes picture softness and clarity for this monitor. BLUR REDUCTION – Adjusts the display’s response time to reduce motion blur. - 26 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 27: Color
RGB (red, green, blue) values manually. ADVANCED – Adjusts the tint and saturation of the six colors (Red, Green, Blue, Cyan, Magenta, Yellow). GAMMA – This option adjusts the picture's white color details. - 27 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 28 This option adjusts the color saturation level. BLACK LEVEL EQUALIZER – This option adjusts the black levels of the display. BLUE LIGHT SHIFT – This displays the blue light value to reduce strain on eyes. - 28 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 29: System
This option turns off the monitor if there has been no signal for a period of time. LANGUAGE – This option changes the monitor menu language. OSD H POSITION – This option adjusts the On-Screen Display (OSD) left or right. - 29 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 30 11. MUTE – This option turns on or off the Mute function, silencing the audio output of the monitor source. 12. RESET – This option resets the monitor to Sceptre's factory default settings. - 30 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 31: Supported Video (Displayport) Resolution
1024 x 768 @ 60Hz, 75Hz 800 x 600 @ 60Hz, 72Hz, 75Hz 640 x 480 @ 60Hz, 75Hz *Specifications are subject to change without notice. *HDMI1 & 2: 1920 x 1080 @ 240Hz. - 31 - www SCEPTRE.com SCEPTRE Display User Manual... -
Page 32: Troubleshooting
Please remember to make sure your refresh rate should be at 60Hz. I CAN’T OPEN THE You need to have a valid video signal going through the monitor before turning on the OSD. - 32 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 33 SYSTEM options. I CHANGED MY Open the OSD, under SYSTEM, select RESET to reset COLOR SETTINGS all values back to factory default. NOW I CAN’T GET THE FACTORY DEFAULT BACK. - 33 - www.SCEPTRE.com SCEPTRE Display User Manual...
- Page 34 Make sure your video card supports that feature. Also, HIGHER REFRESH make sure your video card drivers are the newest version RATES ON MY possible and the cable is capable of supporting higher MONITOR Refresh Rates. - 34 - www.SCEPTRE.com SCEPTRE Display User Manual...
-
Page 35: How Do I Detach The Displayport Cable
How do I detach the DisplayPort Cable? To detach the DP cable from the monitor, press down on the cables unlocking button while pulling the cable out. - 35 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 36: How Do I Clean The Led Monitor
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. - 36 - www.SCEPTRE.com SCEPTRE Display User Manual... -
Page 37: Specification
Blue Light Shift HDMI (v2.0) x 2, DP (v1.4) x 2, 3.5mm Audio ETL, ISTA, HDMI, RoHS, CEC, CA65, FCC, Compliance AMD FreeSync Premium ™ *Specifications are subject to change without notice. - 37 - www.SCEPTRE.com SCEPTRE Display User Manual... - Page 38 In the event that the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner, for any upgraded parts substituted.
-
Page 39: Limited Product Warranty
Dead Pixel Policy SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective. -
Page 40: Disclaimer, Trademarks, Icons & Copyright Information
SCEPTRE is a trademark or registered trademark of Sceptre Group. • Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 41: Fcc Compliance Statement
European Notice Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. - 41 - www.SCEPTRE.com SCEPTRE Display User Manual...
Need help?
Do you have a question about the E255B-FWD240 and is the answer not in the manual?
Questions and answers
does the monitor have speakers for sound
Yes, the Sceptre E255B-FWD240 monitor has built-in speakers.
This answer is automatically generated