Yamaha YHT-893 Owner's Manual page 26

TRANSMIT CODE SET
■
When an error message appears
SOURCE RECEIVER
SLEEP
during measurement
HDMI
1 2 3 4
Check the content of the message from the "Error
AV
1 2 3 4
message" (☞p.
AUDIO
5 6 1 2
the measurement process again.
V-AUX [ A ] [ B ] DOCK
TUNER
FM AM
PRESET TUNING
INFO MEMORY
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
STRAIGHT DIRECT
SCENE
BD
TV CD RADIO
DVD
SETUP OPTION Check the error code that appears in the display, and
carry out YPAO again by performing the following steps.
j
ENTER VOLUME
When "E-1," "E-2," "E-4" or "E-6" is
RETURN
DISPLAY
displayed:
TOP POP-UP
MUTE
MENU MENU
jCursor C
1 Press
REC
jCursor E
1 2 3 4
jENTER
2 Press
5 6 7 8
the unit to standby mode.
9 0 10 ENT
TV
INPUT
Check that the speakers are properly
3
TV VOL TV CH
MUTE
connected.
Turn on the unit, and then carry out YPAO
4
again.
j
Cursor C / D / E
j
ENTER
27) to resolve the problem, and carry out
ERROR
. E-9:USER CANCEL
Don't operate
any function
>Retry Exit
[ ]/[ ]:Up/Down
[ENTER]:Return
once, and then press
to select "Exit."
to finish YPAO, and switch
When "E-5," "E-7," "E-8" or "E-9" is
displayed:
Check that the environment is suitable for
1
accurate measurement.
jCursor C
Press once to select "Retry."
2
jENTER
3 Press to carry out YPAO again.
When "E-10" is displayed:
jCursor C
Press once to select "Exit."
1
jENTER
2 Press to finish YPAO.
3 Switch the unit to standby mode.
Turn on the unit again, and then carry out
4
YPAO.
CONNECTIONS
Set up the speaker parameters automatically (YPAO)
■
When a warning message appears
after measurement
Check the content of the message from the "Warning
message" (☞p. 28) to resolve the problem. You can
confirm the speaker that has the problem on the TV screen.
Number of messages
Auto Setup
. WARNING (1)
RESULT
SP : 3/4/0.1
DIST: 2.50/ 3.00m
LVL : -1.0/ +1.5dB
>Set Cancel
[p]/[[]:Select
[ENTER]:Finish
NOTE
Although you can apply the results of measurement
when a warning message appears, doing so will not
provide optimal sound. We recommend you resolve
the problem and then carry out YPAO again.
Confirm the warning message:
jENTER
Press once.
WARNING
W-3:LEVEL ERROR
--- ---
---
--- SR
SBL SBR
SWFR:TOO LOUD
[p]/[[]:Select
[ENTER]:Return
Speaker that has a problem
When multiple warning messages exist:
jCursor D / E
Use to display other warning messages.
When applying the results of measurement:
If an warning message is displayed, press
jCursor D / E
switch display, use
press jENTER.
When cancelling YPAO:
If an warning message is displayed, press
jCursor D / E
switch display, use
and press jENTER.
jENTER
to
to select "Set," and
jENTER
to
to select "Cancel,"
26
En