Ipod™/Iphone - Yamaha YHT-893 Owner's Manual

AM
Problem Cause
The desired station The signal is weak, or the antenna
cannot be tuned into connections are loose.
with the automatic
tuning method.
Automatic station Automatic station preset is not
preset does not
available for AM stations.
work.
Continuous
The supplied AM loop antenna is
crackling and
not connected.
hissing noises are
The noises may be caused by
heard.
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
Buzzing and whining
A TV set is being used nearby.
noises are heard.
See
Remedy
page
Adjust the AM loop antenna orientation. 23
Use the manual tuning method. 35
Use manual station preset. 35
Connect the AM loop antenna correctly 23
even if you use an outdoor antenna.
It is difficult to completely eliminate noise, 23
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
Move this unit away from the TV set. —
iPod™/iPhone™
Display Cause
Loading... The unit is in the process of
recognizing the connection with
your iPod/iPhone.
The unit is in the middle of
acquiring song lists from your
iPod/iPhone.
Connect error There is a problem with the signal
path from your iPod/iPhone to the
unit.
Unknown iPod The iPod/iPhone being used is not
supported by the unit.
iPod connected Your iPod/iPhone is properly
placed in the Yamaha iPod
universal dock.
Disconnected Your iPod/iPhone is removed from
the Yamaha iPod universal dock.
Unable to play The unit cannot playback the
songs currently stored on your
iPod/iPhone.
APPENDIX
Troubleshooting
See
Remedy
page
—
—
Turn off the unit and reconnect the Yamaha 40
iPod universal dock to the DOCK jack of
the unit.
Remove your iPod/iPhone from the Yamaha 40
iPod universal dock and then place it back in
the dock.
Connect an iPod/iPhone supported by the —
unit.
—
—
Check that songs are currently stored on —
your iPod/iPhone.
75
En