Table of Contents
Advertisement
Quick Links
-Read and understand all instructions before installing, operating, changing
accessories. Failure to follow the warnings and instructions in this handbook
can result in electric shock, fire or serious bodily injury.
-Do not discard this handbook. Save these instructions for future reference.
Instruction Handbook
UDT-200E & UDT-500E
Digital Torque Testers
' GENERAL SAFETY INSTRUCTIONS '
3rd Edition
2 June, 2020
International Dept.
+81 (0)6 6973 9415
+81 (0)6 6972 0346
uryuair@uryu.co.jp
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for URYU UDT-200E
Summary of Contents for URYU UDT-200E
- Page 1 Instruction Handbook UDT-200E & UDT-500E Digital Torque Testers ‘ GENERAL SAFETY INSTRUCTIONS ’ -Read and understand all instructions before installing, operating, changing accessories. Failure to follow the warnings and instructions in this handbook can result in electric shock, fire or serious bodily injury.
-
Page 2: Table Of Contents
EC DECLARATION OF CONFORMITY WE, URYU SEISAKU, LTD., 1-2-11 FUKAE-MINAMI, HIGASHINARI, OSAKA 537-0002, JAPAN DECLARE THAT OUR TORQUE TESTERS, UDT-200E AND UDT-500E, AND IN COMBINATION WITH OUR ACCESSORIES, TO WHICH THIS DECLARATION RELATES, ARE IN COMPLIANCE WITH THE ESSENTIAL REQUIREMENTS OF THE EUROPEAN PARILIAMENT AND THE COUNCIL DIRECTIVE,... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS Take note that two different signs, ‘WARNING’ and ‘CAUTION’ are used in this instruction handbook according to the degree of seriousness and urgency. ： The misuse of the product may cause the operators death or severe injury and the event shall be reported to all personnel immediately. -
Page 4: Maintenance And Service
(wrist-watch or ring) prior to operation. Inspect cables periodically for damage and repair or exchange if signs of wear are noticed. ●Contact your local authorised URYU distributor or URYU Japan for overhaul to avoid electric shock, personal injury and fire. -
Page 5: General Precautions
◆Disposal ●Dispose the tester as your industrial waste. Follow your local laws and regulations relating to Disposal. ◆Others ●Never modify the tester to avoid an electric shock, injury or fire. ●Stop using the tester immediately and turn off the tester whenever something unusual occurs. General Precautions ●Keep visitors away from work area. -
Page 6: Appearance
TORQUE N・m ▲ CAL.CHECK INDI.OFF ZERO ADJ TIME SURVEY TIME(sec) P-D T-R POWER C ＭＥＭ・ＤＡＴＡ INPUT Ｄ Ｗ FUSE 0.5 Ａ ＡＮＡＬＯＧ RS232C ＯＵＴＰＵＴ AC100 －240V AMPLIFIER PICK-UP Amplifier Pick-Up Testers Dimensions Dimensions Weight Weight (kg) (kg) UDT-200E 15.0 UDT-500E... -
Page 7: Specifications
Noise Power Ambient Temperature Tester Range Power Temperature Memory Qty Protection Humidity Consumption for Operation (Nm) Preservation UDT-200E 15～200 Built-in 500V 20%-80% Note1 10℃-40℃ 0℃-55℃ Battery 1μS (No dew) 30VA Note2 UDT-500E 150～500 Note 1 : minimum (when on standby) Note 2 : maximum (when charged) 4. -
Page 8: Built-In Battery
3. Put a suitable Test Adaptor into socket of PICK-UP. 4. Turn on the tester. Display panel will indicate 0.0 (for UDT-200E) or 0 (for UDT-500E). ＊The power cable should be used only when recharging the battery. Disconnect the power cable from the amplifier while operation. -
Page 9: 8. Accessories
CAL CHECK is used for verification of normal function of the tester. Set PEAK SWITCH knob to [T-R] position. Then press CAL.CHECK switch to confirm that LED display panel indicates below range of figures. ・UDT-200E ----- 189.0Nm – 191.0Nm ・UDT-500E ----- 485Nm – 495Nm 9. ‘BLOW COUNTER’... - Page 10 INSTRUCTION HANDBOOK (3rd Edition) for UDT-200E & UDT-500E, Digital Torque Testers URYU SEISAKU, LTD. 1-2-11, Fukae-Minami, Higashinari, Osaka, Japan. TEL. ：+81-6-6973-9415 FAX ：+81-6-6972-0346 EMAIL：uryuair@uryu.co.jp DISTRIBUTED BY：...
Need help?
Do you have a question about the UDT-200E and is the answer not in the manual?
Questions and answers