Subscribe to Our Youtube Channel
Related Manuals for Teleste TEN-FWO1
Summary of Contents for Teleste TEN-FWO1
- Page 1 FTTx SOLUTIONS FTTH Fibre Outlet - TEN-FWO1 Installation Guide Rev. 3.00/02.2024...
-
Page 2: Table Of Contents
FTTx Solutions Contents Getting Started............................1 Introduction ............................1 Package Contents ..........................1 About the TEN-FWO1 Fibre Outlet ......................2 Product Specification ........................... 2 Mechanical Layout ..........................2 Installation Instructions .........................3 General Preparations and Precautions ....................3 Preparation of the Incoming Optical Drop Cable ................. -
Page 3: Getting Started
FTTx Solutions Getting Started Introduction Thank you for choosing this Teleste product. The TEN-FWO1 is a modern and compact FTTH Fiber Outlet designed for indoor mounting at customer premises. Engineered for swift and easy installation, it acts as the interface between the network and the customer device. -
Page 4: About The Ten-Fwo1 Fibre Outlet
FTTx Solutions About the TEN-FWO1 Fibre Outlet The TEN-FWO1 has been designed primarily for applications such as FTTH. The unit is very compact and easy to install along with convenient maintenance, it may be delivered empty, with pigtails, adapters and/or subscriber cable in a suitable box according to customer needs. -
Page 5: Installation Instructions
TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions Installation Thank you for choosing this Teleste product. Please take a moment and carefully read these instructions through before installing the product. Instructions General Preparations and Precautions 1. - Page 6 TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions 4. Press the pins on both sides of the TEN-FWO1 to unlatch and open the lid, see Picture 2. All necessary safety instructions must be followed during the installation and maintenance operations.
- Page 7 TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions 6. The incoming cable is threaded through the centre opening. The method offers two cable tie fixing positions, see Picture 4. Warning! Never look directly into the end of a fibre or a fibre connec- tor that may be carrying laser light.
- Page 8 TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions 8. Splice the drop cable with the pigtail, organize, and coil any excess cable around the radius limiter. Next, place the sleeve in the splice holder.
- Page 9 TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions 9. Place the lid back on to cover the splice and cables. Insert the FTTH subscriber cable into the adapter and pull down the protective lid.
-
Page 10: Mounting Guidance
TEN-FWO1 Installation Guide Rev. 3.00/02.2024 e n l i g h t e n FTTx Solutions Mounting Guidance To perform a wall mount installation: Drill two holes in the wall based on the sizes in the mechanical layout drawing on page 2. Insert the expansion plugs, position the box to align with the holes, and secure it in place using bolts. -
Page 11: Legal Declarations
This document is protected by copyright laws. Unauthorized distribution or reproduction of this document is strictly prohibited. Teleste reserves the right to make changes to any of the products described in this document without notice and all specifications are subject to change without notice. - Page 12 Teleste reserves the right to make changes to any features and specifications of the products without prior notice. Although the information in this document has been reproduced in good faith, the contents of this document are provided “as is”. Teleste makes no warranties of any kind in relation to the accuracy, reliability or contents...
Need help?
Do you have a question about the TEN-FWO1 and is the answer not in the manual?
Questions and answers