Master Spas Master Clear Salt System Owner's Manual page 9

WATER MAINTENANCE CONT.
AS NEEDED
If the water looks hazy, make sure pH is in the proper range and make
sure the output level is maintaining the proper sanitizer levels� Treat
with Oxidizer shock if free chlorine is less than total chlorine� Always
refer to the chemical manufacturer's dosage recommendations listed on
the container� Free chlorine levels should be maintained per the Water
Chemistry Guide�
A defoamer may be used when excessive foaming occurs� Overuse
of a defoamer will result in cloudy, milky water� These are general
recommendations for water maintenance that may vary by usage and
bather load� Depending on bather load and frequency of use, drain and
refill times may vary�
WATER CHEMISTRY GUIDE
Before treating your water, refer to the Model Specifications section in
the spa's manual for the correct gallons listed for your spa, to ensure you
are adding the correct amount of chemicals� The concentration of active
ingredients in spa chemicals varies by manufacturer, so always consult
the chemical manufacturer's instructions� When adding spa chemicals,
make sure to always spread them across the surface of the water while
the pumps are running� See the chart for recommended ranges�
*Chemical names and recommendations listed in this manual are specific
to the Master Clear Salt System chemicals by Master Spas� Chemical
amounts and instructions will vary by manufacturer�
MASTER CLEAR SYSTEM CONTROLS
MASTER CLEAR SALT
SYSTEM APP
1.
When you open up the app you
will see the main screen� Here
you will choose to connect using
Wi-Fi or Bluetooth�
USE ONLY SPA CHEMICALS
Do not use chemicals designed for use in swimming pools� With a spa,
you are working with a small volume of hot water instead of a larger
volume of relatively cool water in a swimming pool� Because of this,
chemicals will have a shorter lifespan, and bacteria can grow more
quickly than in a swimming pool� A spa is less forgiving than a pool
and requires whatever is put into it to have a pH as close to neutral
as possible� This is why only chemicals made for spas should be used�
Always refer to the chemical manufacturer's dosage recommendations
listed on the container�
PARAMETER
Water Clarity
Color of Water
Total Alkalinity (TA)
pH Value
c,d
Chlorine
Calcium Hardness
When using alternative/additional disinfectants other appropriate parameters
may be considered�
a Consult national regulations and guidelines for any deviations�
b Natural water sources may introduce water coloration�
c Subject to the flocculant(s) used (if any)�
d When pH is greater than 7�5, the free active chlorine is less than 50%�
NOTE: Improper use of chemicals may result in unsanitary and unsafe
water conditions as well as unwarranted discoloration, degradation,
damage and other imperfections to both the Master Clear Salt System
and spa surfaces and components�
2.
Selecting the
Wi-Fi option
will bring
you to the
registration
page� Here,
you can
register/
create an
account,
allowing
connection
to the
Master Clear
Salt System
as long as
you have a
valid internet
connection�
7
a
VALUE
Clear view of bottom
No color should be observed
b
60 - 120 PPM
7.0 - 7.2
2 - 4 PPM
180 - 250 PPM