Advertisement
EN
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
If you have followed the instructions in the printed Quick Setup Guide included with your
machine and selected step 5-B "Set up from the machine's control panel", go directly to step
5-B in this guide.
Unpack the machine and
a
check the components
Remove the protective tape or film covering the
machine and the supplies.
NOTE
• The illustrations in this guide may not match your model
exactly, but the steps are the same for each model.
• The components may differ depending on your country.
• Save all packing materials and the box in case you need to
ship your machine.
• If you use a wired connection, you must purchase the correct
interface cable for the interface you want to use. (Supported
models only)
USB cable: Use a USB 2.0 cable (Type A/B) that is no more
than 2 metres long (included in some countries).
Ethernet (Network) cable: Use a straight-through Category
5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network (not included).
• Brother aims to reduce waste and save both raw materials
and the energy required to produce them. Read more about
our environmental work at www.brotherearth.com.
Continue to the next column
Quick Setup Guide
DCP-J1310DW / DCP-J1313DW / DCP-J1360DW / DCP-J1460DW
MFC-J4350DW / MFC-J4550DW
The latest manuals are available at the Brother
support website: support.brother.com/manuals
Load plain A4 paper in the
b
paper tray
1
D037JM001-00
UK
Version 0
Advertisement
Table of Contents
Related Manuals for Brother DCP-J1310DW
Summary of Contents for Brother DCP-J1310DW
- Page 1 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network (not included). • Brother aims to reduce waste and save both raw materials and the energy required to produce them. Read more about our environmental work at www.brotherearth.com.
-
Page 2: Connect The Telephone Line
For more information on using the fax feature, see the Online User's Guide. (For Europe) We can send you a genuine Brother Set up with your computer cord free of charge if you need one. To contact us, (Windows only) visit www.brother.eu. -
Page 3: Set The Date And Time
Follow the LCD instructions to install the ink DCP-J1310DW / DCP-J1313DW cartridges. DCP-J1360DW / MFC-J4350DW 1. Press when the QR Code screen appears. 2. Press when the [Set up from machine] screen appears. DCP-J1460DW / MFC-J4550DW 1. Press [Setup without app/software] when the QR Code screen appears. -
Page 4: Check The Print Quality
To adjust the print alignment before using your When the initial ink system cleaning has finished, machine, print the Adjustment Sheet: print the Print Quality Check Sheet: DCP-J1310DW / DCP-J1313DW DCP-J1310DW / DCP-J1313DW DCP-J1360DW / MFC-J4350DW DCP-J1360DW / MFC-J4350DW When the paper adjustment message appears, Press . - Page 5 Follow the LCD instructions if displayed, and then connected to the same network. confirm the machine setup completion. NOTE DCP-J1310DW / DCP-J1313DW DCP-J1360DW / DCP-J1460DW For USB connection, locate the correct port on the side of the machine, as shown.
-
Page 6: Manual Wireless Setup
For more information, see Enter Text on Your Brother Machine in the Online User's Guide. When the wireless setup is successful, the LCD displays [Connected]. For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals. D037JM001-00 © 2024 Brother Industries, Ltd. All rights reserved.
Need help?
Do you have a question about the DCP-J1310DW and is the answer not in the manual?
Questions and answers