Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Magnimage MIG-DN9402
Summary of Contents for Magnimage MIG-DN9402
- Page 1 MIG-DN9402 4K Video Mo saic Ser ver User manual V1.1 Before using this 4K video mosaic server, please read this manual carefully and keep it for reference in the future. △ Version：V1.1 Date：2022-08-31 4K Video Mosaic Server...
- Page 2 Statement Without the written permission, any unit or individual could not copy, reproduction or translate the book or part of it. Also could not transmit it in any form or any way (electronic, mechanical, photocopying, record or other way) for any business and profitable purpose.
-
Page 3: Table Of Contents
Directory BRIEFS ........................1 ............................1 RADEMARK CREDIT PRODUCT FEATURES .....................2 PORT OPTION AND MODEL ........................3 SAFETY INSTRUCTION ..........................4 MACHINE SPECIFICATION ........................4 FUNCTION ......................5 INTRODUCTION ............................. 5 FRONT PANEL INTRODUCTION ......................6 BACK PANEL INTRODUCTION .........................6 SOFTWARE CONTROL ..........................8 INSTALL ..............................8 UNINSTALL ............................10 SOFTWARE INTERFACE ........................ -
Page 4: Revision History
Revision History Brief introduction of serial Revision date version revision content Initial distribution 2021/10/11 V1.1... -
Page 5: Briefs
BRIEFS Thanks for your purchasing our MIG-DN9402 series 4K video mosaic server. Do hope you can enjoy the experience of the product performance. The design of the LED video processor conforms to international and industry standards. But if with improper operation, there will be a personal injury and property damage. -
Page 6: Product Features
Product Features Support 4-channel HDMI 2.0 splicing output (each output is equipped with a copy backup interface), each output supports 4K×2K@60Hz, the maximum splicing 16K×2K@60Hz； Support DP1.2&HDMI2.0 input and 12G SDI input； Supports up to 9 channels of 4K×2K@60Hz input, DP supports 8K× ... -
Page 7: Port Option And Model
PORT OPTION AND MODEL MIG-DN9402 is basic model, can extend input port according to requirements, The models are shown in the table below:： PRODUCT MODEL INPUT PORT MIG-DN9402 HDMI2.0×4、DP1.2×4 MIG-DN9402-S HDMI2.0×4、DP1.2×4、12G SDI×1... -
Page 8: Safety Instruction
SAFETY INSTRUCTION The power input voltage range of the product is 100~240V AC/60HZ,please use the correct power supply accordingly. When you need to connect or pull out any signal or control cables. Please confirm that all the power supply cords have been pulled out ahead. When you need to add hardware device for the machine, make sure all of ... -
Page 9: Function
FUNCTION INTRODUCTION MIG-DN9402 is a 4K video mosaic server developed for display systems. It adopts the industry's top image processing chip, internal 24-bit digital processing, and adopts 4K@60Hz 4:4:4 image processing technology. The image is clearer and the color is richer , support multiple 4K@60Hz input. -
Page 10: Front Panel Introduction
Show IP address of the machine，The default IP address of the machine is 192.168.1.10 BACK PANEL INTRODUCTION MODEL：MIG-DN9402-S CONTROL PORT RJ45×1 Network cable port, PC controls MIG-DN9402 through LAN connection USB×1 USB upgrade port, Upgrade MIG-DN9402 by inserting U disk RS232×1 RS232 port，For RS232 protocol control... - Page 11 Genlock in&out×1 Genlock syn interface for Genlock input signal synchronization OUTPUT PORT HDMI2.0（4×2） 4 groups HDMI2.0 output，each output has a backup output HDMI（MONITOR） Fixed output 1920×1080@60Hz resolution, used to monitor the whole screen output INPUT PORT HDMI2.0×4 4 x HDMI2.0 input DP1.2×4 4 x DP1.2 input 12G SDI×1（OPTION）...
-
Page 12: Software Control
All the functions of the controller can be realized by using the computer software. INSTALL Download the MIG-DN9402 software from the official website of Magnimage, and double-click the MIG-DN9402 setup.exe installation package to install it. On the computer without the software, the installation guide program will be... - Page 13 Double-click the installer to start the installation process, click "OK" to go to the next step Default program installation location or browse to select another installation location and click "Install" The installation process is in progress After the installation is complete, the software is checked by default to ...
-
Page 14: Uninstall
UNINSTALL Computer application and function settings Find the MIG-DN9402 software, select "Uninstall" Select "Yes" to delete all its components The software is being uninstalled Select "Yes" to clear user data ... -
Page 15: Software Interface
SOFTWARE INTERFACE After opening the software, the interface is shown as above, including: menu bar (device function) and device list (device IP address and name) Show all devices in the LAN When there is no device, add a virtual Add virtual Device List device to simulate the presentation, the icon "... -
Page 16: Project
After the computer is connected to the device Reset normally, click Change Device IP to restore the default IP address of the device IP（PC） Display PC local IP address write to screen Set the LCD display label, currently only supports English Off the software exit software, icon“... - Page 17 New project file, which is used to store all configuration New project data and information. Under the current project, the default file name is the current computer local time. The new project path is the software installation path, and the file name and file path can be changed.
-
Page 18: Output
OUTPUT Displays the resolution, name (renameable) and output OUTPUT LIST port usage of each output. The green light is on when the output port is in use, and the green light is off when the output port is not in use. OUTPUT Quick mosaic: horizontal, vertical and 2x2 or custom LAYOUT... - Page 19 output is up to 2600 pixels, and the refresh rate is up to RESOLUTION 121 Hz OUTPUT Window size and position settings for output images WINDOW Mosaic The splicing parameter determines the display range of parameters the current output port on the entire screen Split screen Choose split screen layout on one output port for layers Output list...
-
Page 20: Layer
Layer Input source Display the type of input interface, whether there is a signal list input or not, and the resolution of the input Quick black One-key setting to black screen screen Image freeze Used to freeze the current output picture, so that the output picture stays in a certain frame of the signal Layer precisely change the size and position of the layer... -
Page 21: Preset
Preset Save preset Save the current layer display configuration to the device's hardware memory Load preset Read saved preset configuration in Video Stitcher Delete preset Used to delete saved preset configurations in a single video stitcher, icon“ ” Preset Rename For changing preset name, icon“... -
Page 22: Subtitle
list EDID setting Get the required input resolution and lock the transmit signal with EDID lock settings Turn on or off crop the input signal to display part of the Input crop input signal picture or remove the black border of the input signal Subtitle Subtitle input... - Page 23 Save subtitle Save subtitle Display area The display range of subtitle output can be selected: output 1, output 2 switch ON or OFF subtitle foreground the font display color, you can choose any color color, and the transparency defaults to 0 Preview background the background color of the font, you can...
-
Page 24: Function
On-screen preview settings Function... - Page 25 Version Display software version, device hardware ARM, FPGA, CPLD information version number and chip temperature The monitoring of the output port can be selected by the Monitor switch, the default setting (2x2 splicing), horizontal splicing, window layout vertical splicing and custom window layout (modify the switch of each output port, horizontal start, vertical start, horizontal width, and vertical height values.
-
Page 26: 语言/Language
Monitor window layout Background 语言/Language The display language of software is Chinese by default and Language can be changed to English. After changing the language, restart the software, then the display language of the setting software is English... -
Page 27: Quick Use Manual
Quick Use Manual Prepare Work Internet connection Connect control computer and the device MIG-DN9402 to the same local area network with a network cable; 2. The default machine IP of the device MIG-DN9402: 192.168.1.10, the subnet mask: 255.255.255.0; the IP address can be viewed on the LCD screen on the front panel of the machine;... -
Page 28: Steps
command box and enter CMD Enter to confirm; ping 192.168.1.10 to check whether the communication is working or not; Steps 1. Change the local IP address of the control computer Turn off the antivirus software, computer housekeeper and firewall of the host computer, and ensure normal communication;... - Page 29 Install software Find disk provided with device, open MIG-DN9402_x.x.x.x.exe control computer installation package and complete the installation; (if the U disk or control computer installation package files are lost, please contact Magnimage Support Engineer） Run the Software...
- Page 30 Open the software, automatically obtain the local IP address and MAC address of the computer by default, click the refresh button " " to search for the device, and click the searched device to connect； New project In the project menu, select New Project, the default file name and project path or change the file name and project file storage path, click "Yes"...
- Page 31 The resolutions of the four sending cards are as follows： sending card 1：3840×2160@60Hz sending card 2：3456×2160@60Hz sending card 3：3840×1920@60Hz sending card 4：3456×1920@60Hz Set output resolution In the output function menu, set the output according to the widest and highest pixel points of the sending card used in the project site. Output resolution, you can choose software fixed resolution or user-set custom resolution and apply, the widest pixel in the 4 sending cards of this project is 3840, the highest pixel is 2160, then the output resolution is set to...
- Page 32 6. Modify the corresponding output window and splicing parameters, output window parameters and splicing according to the corresponding sending card on-board pixels parameters must be consistent； Sending card 1： Sending card 2： Sending card 3： Sending card 4： Note： If the resolution of the four sending cards are the same, set the output resolution according to the resolution of the sending cards, and the output window parameters and splicing parameters do not need to be modified at this time;...
- Page 33 Change output output layout Change the output layout according to the sending card layout used on the project site； Layer Configuration In the layer function menu, double-click the layer to cover all the output ports to display the full screen, and right-click the layer to set top, bottom, copy, paste, close the layer, close all layers and other operations;...
- Page 34 Add layer and change layer input signal Click the selected layer with the mouse and then click the input signal to change the input signal of the layer (orange when selected, gray when not selected), click the input signal and drag it to the screen to increase the number of layers;...
- Page 35 Increase the layer signal display (equally divided into two pictures): the computer DP signal on the left, the camera SDI signal on the right, the precise layer value can be changed in the layer configuration, go to the preset function menu again to save to preset-2, and change the preset set name; 10.
- Page 36 Operation...
-
Page 37: Warranty
Warranty Machine Warranty 24 months from the date of purchase of the user’s invoice. If the user purchase invoice is lost, the 60 days after the production date will be the warranty start date for the product. Non-Warranty The machine soaking and collisions produced besmirch or ...
Need help?
Do you have a question about the MIG-DN9402 and is the answer not in the manual?
Questions and answers