Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Magnimage LED-F806
Summary of Contents for Magnimage LED-F806
- Page 1 LED-F806/F808/F810 Video Control Ser ver V1.0 User Manual △ Before using this LED video processor, please read this instruction manual carefully and keep it for future reference. Document Version：V1.0 Document Release Date：2023/07/14 LED-F806/F808/F810...
-
Page 2: Statement
Statement Without the written permission of the company, no unit or individual may copy, transcribe or translate part or all of the contents of this manual.This manual shall not be distributed in any form or by any means (electronic,mechanical, photocopying, recording or other possible means) for commercial or commercial purposes. -
Page 3: Table Of Contents
Directory Statement ............................2 Introduction ..........................2 Trademark Credit ..................................2 About the software ................................. 2 Product Features ..................................3 Port Extension ................................... 4 Safety Notice ..................................... 4 Features ............................5 Overview ..................................... 5 Technical Specifications .................................8 Use Menu ............................ 10 How to use the buttons ..............................10 MENU Area：... -
Page 4: Introduction
Introduction Thank you for purchasing our company's LED all-in-one video controller. Hope you can enjoy the excellent performance of this product. The design of this LED all-in-one video controller complies with international and industry standards, but improper operation may still cause personal injury and property damage. -
Page 5: Product Features
can carry maximum width 8192 pixels and maximum height 3840 pixels Support template save and load Support connection to MAGNIMAGE C-Link series receiving cards Support free wiring function Support receiving card serial number calibration, switch on the ... -
Page 6: Port Extension
Port Extension LED-F806, LED-F808, and LED-F810 are the basic models. On this basis, an additional 3G SDI input source can be expanded. The expanded models are shown in the table below: Available Expansion Modules Product Model Expand 1 external SDI input module... -
Page 7: Features
Features Overview The video control server is a video controller created by Magnimage, which integrates video processing, splicing, switching and LED screen sending card functions. This series integrates various professional input interfaces, supports up to 4K × 2K/60Hz , LED-F806S single machine can load 5.88 million pixels, and support 6 Gigabit Ethernet port output;... -
Page 10: Technical Specifications
Video Input Port DVI1-DVI2 2 x DVI input ports（Choose either DVI2 or DP input to use） DP1.1 1 x DP input ports（Choose either DVI2 or DP input to use） HDMI2.0 1 x HDMI2.0 input ports 3G SDI(extend) 1 x SDI input ports Audio（in）... - Page 11 Output Information Model Quantity Of Resolution Specification Port Single port load 0.98 million pixels, whole Gigabit unit load 5.88 million pixels,a single LED-F806S Ethernet Port machine can carry maximum width 8192 pixels and maximum height 3840 pixels Single port load 0.98 million pixels, whole Gigabit unit load7.84...
-
Page 12: Use Menu
Use Menu Using the product menu system can easily and intuitively set the machine to meet the user's use requirements The all-in-one video controller uses a full-color LCD display to display the entire user menu. When the user does not operate or the operation times out, the default state will be displayed on the LCD screen. -
Page 13: Layer Area
↖ confirm button, short press knob, can switch between the two modes ↗ Under browse mode, Anticlockwise rotate the "knob", the cursor moves up or left; rotate the "knob" clockwise, the cursor moves down or right. When moving the cursor to the item to be adjusted, press the "knob" or the confirm button to enter the setting mode, then turn the "knob"... -
Page 14: Introduction To Default State
Introduction to Default State After turning on the power of the all-in-one video controller, during the system boot process, the boot interface will be displayed on the LCD screen of the front panel. After the startup is completed, the default state of the current machine will be displayed on the screen, as shown in the figure below：... -
Page 15: Main Menu Introduction
The operation mode is as follows： Operate Introduction Open Main In the default state, press the rotary knob or slide the "magnimage" in the Menu upper left corner Select each Rotate the knob to select each item... -
Page 16: Main Menu
Main Menu In the default state, press the "knob" button, and the menu system will enter the main menu state. and the LCD screen will display as shown in the figure below: There are 4 menu items in the main menu. Use the knob to select the 4 menu titles listed above. - Page 17 Quick Configuration： Screen Can debug the brightness of the large screen (default value is 50, Brightness brightness value range is 0-256) When all the network ports are routed in the same way, light the screen quickly according to the number of cabinets, the connection of the Quick network cable, the arrangement and other information.
- Page 18 CabineMark： Set the corresponding routing method, box width and height quantity, Manual and horizontal/vertical position value of the network cable offset for Configuration each network port When opening the box marking, the large screen will display the network CabinetMark port number and receiving card number of each box, allowing for a very intuitive connection diagram TxCardReset Reset sending card connection screen parameters...
- Page 19 Test Patten1~10 RxCardReset Reset receiving card parameters Output Customize the output resolution of the machine Resolution Test Patten Default to off state, test screen 1-10 options...
- Page 20 Local Backup： Muilti Machine Backup：...
- Page 21 Single machine can specify any network port for Local Backup backup. Ethport When multiple machines are in the same LAN, Backup Multi-Machine you can choose another machine as the backup Backup or primary machine, and setting the IP address of the other machine can achieve fast backup The default state is off.
- Page 22 machine LocalParamSaveUdi USB flash drive for saving single box parameter files stored in the machine Obtain all single box parameter files stored in Local Files the machine in DTR format LinUpFile： Save the display screen connection cable file to UDiskLineUpSave the USB flash drive UDiskLineUpSavet Save the wiring file of the display screen...
-
Page 23: Layer
LAYER Layer： Crop：... - Page 24 Picture： Size/Pos Can change the horizontal position, vertical position, horizontal width, vertical ition position of each layer Each layer can be independently Cropped without affecting each other, and this Crop is the signal source Crop of the layer Horizontal The maximum value is the difference between "width of Position horizontal reference"...
-
Page 25: Input
INPUT Input： RGB Range： EDID Setting Optionally set EDID for a certain input H_Active Horizontal width V_Active Vertical height Refresh Rate Advanced Adjust BandWidth RGB Range Can modify the color range of DVI, HDMI, and DP inputs, divided into... -
Page 26: Misc
"automatic", "0-255", and "16-235" After setting up the EDID, for different computers and graphics card outputs, it may be necessary to restart the computer or unplug the signal cable. In the display settings menu of the computer, select the corresponding resolution. - Page 27 Label： Machine LCD panel display Conveniently mark which areas the machine is carrying, define a serial number for the machine, and enable this function to display on the Label machine's LCD screen. The default interface becomes this note, as shown in the figure above Caption：...
- Page 28 COMM.： USB Setting： Out Freeze： IP Setting Can change the IP address of this machine Switch this mode and use square USB COMM communication COMM USB Setting Switch this mode to upgrade the machine UDisk Files using a flat USB port Out Freeze Freeze the current device output screen...
- Page 29 English/语言： 语言/Language Can switch between English or Simplified Chinese Time/Task Management：...
- Page 30 Date And Set the time and date of the machine Time 10 time tasks can be set, which can be edited separately. Select a trigger time, and then select the trigger time point screen brightness or load preset. Task operations include "single time", "daily", and "cycle".
- Page 31 Work Mode： Version： Supports "two in one" and "photoelectric" working modes, and the Working Mode default is "two in one" mode. Factory Reset Restore the machine factory settings Version Check the ARM, FPGA, CPLD versions and current operating Information temperature of the machine...
-
Page 32: Warranty
Warranty Machine Warranty Period 24 months from the date of the user's purchase invoice； If the user's purchase invoice is lost, the 60th day after the production date of this product is the start date of the warranty for this product. Non Warranty Faults or damages caused by abnormal use reasons such as stains or ...
Need help?
Do you have a question about the LED-F806 and is the answer not in the manual?
Questions and answers