Hartman Eton 68818148 Assembly Instructions

Rectangular adjustable table top & base

Download this manual

Assembly Instructions

Eton Rectangular Adjustable Table Top & Base

PLEASE RETAIN THIS DOCUMENT ALONG WITH YOUR

Congratulations on your recent purchase of your beautiful Hartman furniture. We hope it

brings you countless special moments with friends and family for many years to come.

Please follow these simple steps to build your furniture. We also have a very useful video

available online to assist with the assembly, please visit www.hartmanuk.com

TOP TIPS

Please read these instructions carefully before assembly, for further assistance

please view our assembly video online for an easy step by step demonstration.

Aluminium is a soft metal and over tightening may strip the thread or break the

part, please loosely assembly your furniture before tightening to secure.

Please do not use power tools, please use the Allen key provided in the bolt

pack.

Please allow 1 hour for assembly.

This furniture can be assembled with 1 person; however, you may need someone

to assist you when turning the furniture over into position.

(Product Codes: 68818148/68819148)

PROOF OF PURCHASE FOR FUTURE

Need help?

Do you have a question about the Eton 68818148 and is the answer not in the manual?

Page 1 PLEASE RETAIN THIS DOCUMENT ALONG WITH YOUR PROOF OF PURCHASE FOR FUTURE Congratulations on your recent purchase of your beautiful Hartman furniture. We hope it brings you countless special moments with friends and family for many years to come. Please follow these simple steps to build your furniture. We also have a very useful video available online to assist with the assembly, please visit www.hartmanuk.com...
Page 2 PARTS LIST Fixings Components Parts List Parts Picture Description Parts List Parts Picture Description Part no Part no Table Top Frame 68818148A M6*40 Bolts 1006162 Connecting Section 68819148B M6 Flat 1061162 Washers Base 68819148C Allen Key 2002191 Millstone Ceramic Glass 68819148D...
Page 3 STEP 1 & 2: TABLE TOP & BASE ASSEMBLY STEP 1: Attach middle connection section (B) to table STEP 2: Place assembled table top into the bottom base (C) until it clicks into place. top (A) using bolts (E) and washers (F), tighten all bolts using the Allen key (G).
Page 4 CHANGE TO THE OTHER HEIGHT: STEP 1: Lift the table top and move slide forward until you feel the top clip into the high adjustment, or to lower table height, lift up the table top a little bit and move backward to the left direction to adjust to the lowered height.

Eton 68819148