Flexispot CB10-H User Manual page 4

1
Align side panel A and the bottom support beams(H).
Notice: This hole to outside
2
Attach the side panel A to the botton beams(H) using 4 self-tapping screws(I) with guide
holes.
03
3
Attach the top panel (C) to the side panels (A) using 4 self-tapping screws(I) with guide
holes.
4
Attach the back panel (B) to the side panels(A) and the top panel(C) using 5 self-tapping
screws (I) with guide holes.
Notice: This part is on the front
04