Image Mode Selection - ViewSonic PJL6243 User Manual

Direct Operation
Select the desired image mode among Dynamic,
Standard, Real, Cinema, Blackboard (Green),
Colorboard, Image 1, Image 2, Image 3 and Image 4
by pressing the IMAGE button on the remote control.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
select and then press the Point ► or the SELECT
button.
2
Use the Point ▲▼ buttons to select the desired
item and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
At the time of simple projection on the colored wall,
you can get the close color image to the color image
projected on a white screen by selecting the similar color
to the wall color from the preset four colors.
Image 1–4
For viewing with the user preset image mode in the
Image Adjust Menu (see page 41).
ViewSonic

Image Mode Selection

Remote Control
Image select Menu
39
39
Video Input
IMAGE button
IMAGE button
Dynamic
Standard
Real
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
PJL6243