Image Adjustment - ViewSonic PJL6243 User Manual

1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
2
Use the Point ▲▼ buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons
to adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast;
press the Point ►button to increase the contrast (from
0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness;
press the Point ►button to increase the brightness
(from 0 to 63).
Iris
Press the Point ◄► buttons to select Off or On.
Off ...... Disabled.
On ...... The iris function is activated.
Color temp .
Use the Point ◄► buttons to select the desired Color
temp. level (XLow, Low, Mid, or High).
White balance (Red / Green / Blue)
Press the Point ◄ button to lighten R/G/B tone; press
the Point ► button to deepen R/G/B tone (from 0 to 63).
Sharpness
Press the Point ◄ button to decrease the sharpness
of the image; press the Point ► button to increase the
sharpness of the image (from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the gamma value
to obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
Point ► or the SELECT button. Use the Point ▲▼
buttons to select one from Image 1 to 4 and press the
SELECT button.
A confirmation box appears and then select Yes. Stored
data can be called up by selecting an Image (1-4) in the
Image Mode Selection on page 32.
ViewSonic

Image Adjustment

Image Adjust Menu
Store
A confirmation box appears
and then select Yes.
Note:

• When White balance Red, Green or Blue is
adjusted, Color temp . will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp . will
change to Blackboard or Colorboard.
33
33
Computer Input
Selected Image mode
Use the Point ◄►
buttons to adjust the
setting value.
PJL6243