Installation - ViewSonic N1300 User Manual

Installation

1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries incor-
rectly may result in cracking or leakage, which may pose a risk of fire or lead to
personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
2. Connect Audio Cable
Connect Video/Audio cables from compatible devices into the back panel of N1300.
OPTIONAL:
To connect an external amplifier,
connect the stereo mini cable
from the TV AUDIO OUT port to
the appropriate AUDIO IN port on
a compatible amplifier as shown
on the right.
Stereo system
(Cable not supplied)
ViewSonic N1300 9