Before Using Remote Control (Inserting Battery) Push and slide the back cover off the remote control. Insert 2 LR03 AAA 1.5 v batteries into the battery compartment. Reinstall the back cover to the remote control. • After new batteries are inserted into the remote control, the display screen will lights up for 3 seconds.
Page 5
Just Right, Always. Made to live with you, Della puts controls in your hands so that you can easily dail in a stress-free space that helps you feel more you. v.20250425U...
Before Using Remote Control Display Indicate operating status, temperature or timer setting Mode Button Power Button Select operation mode Turn ON / OFF the air conditioner -00- -00- Page 08 Page 08 Increase / Decrease Button Adjust temperature / timer setting Fan Button Select fan speed Air Flow Button...
Page 7
Before Using Remote Control LED Indicator Function LED Indicator Function Signal Indicator Horizontal & Vertical Air Flow Indicator Child Lock Quiet Mode Indicate Set Temperature Fan Speed Indicate Room Temperature Turbo Mode Low Battery Eco Mode Auto Mode Sleep Mode Cool Mode Timer Dehumidify Mode...
Basic Operation Power ON Press • The air conditioner will start operating. Power OFF Press • The air conditioner will stop operating. Select Operation Mode Press to select operation mode. Auto Cool Dehumidify Heat • It may takes a few minutes for the air conditioner to switch between modes. •...
Page 9
Basic Operation Adjust Temperature Press to adjust temperature setting . • Temperature setting will adjust by 1°F / 1°C increment for each time the button is pressed. • Press and hold the buttons to adjust temperature continuously. • Temperature can only be set between 60°F - 90°F / 16°C - 32°C. Set Fan Speed Press to select your desired fan speed.
Page 10
Basic Operation Adjust Air Flow Press to oscillate horizontal flaps. The flaps will stop at the position it was in when you Press one more time. pressed the button. Press to oscillate vertical vanes . The vanes will stop at the position it was in when you Press one more time.
Advance Function Turbo Mode Using turbo mode can boost the air conditioner performance in a short amount of time. Press • The air conditioner will operate in boosted fan speed. • Turbo mode is not available when the air conditioner is operating in auto mode or dehumidification mode.
Page 12
Advance Function ECO Mode The air conditioner will operate with maximum energy efficiency. Press • ECO mode is only available when the air conditioner is operating in cool mode. Press again or turn off the AC to cancel ECO mode. ECO mode will also automatically disabled after operating for 8 hours.
Page 13
Advance Function Timer Function (Shutdown Timer) Set a timer to automatically turn OFF the air conditioner. Press when the air conditioner is ON. Press to set the desired turn off time. Press to confirm the timer setting. Timer Function (Start-up Timer) Set a timer to automatically turn ON the air conditioner.
Page 14
Advance Function Vicinity Sensor Vicinity sensor function turns your remote control into a portable thermostat that automatically controls the unit to adjust the temperature of the room you are in. Press to activate vicinity sensor function. • The display panel will show your set temperature. •...
Page 15
Advance Function Self Cleaning Self cleaning function allows the air conditioner to clean the interior parts and helps carry away the accumulated dirt, bacteria, etc. from the indoor evaporator. Press when the air conditioner is OFF. • will display on the remote control display. •...
Page 16
Advance Function °F / °C Press and hold for 5 seconds. • The temperature unit will switch between °F and °C. Forced Defrost To maximize heat efficiency, you can force the outdoor unit to perform a defrost cycle before using heat mode.
Page 17
Advance Function Wi-Fi Reset Wi-Fi reset function allows you to pair the air conditioner to your mobile device's app. When the AC is on, press 8 times within 4 seconds. • The indoor unit will make "beep beep" sound and reset the Wi-fi connection. •...
Compliance Information Radio Frequency Interference ID: 2ANDL-TYAUX-J FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RA02 and is the answer not in the manual?
Questions and answers