Subscribe to Our Youtube Channel
Related Manuals for SW-Motech GPT.07.975.30002
Summary of Contents for SW-Motech GPT.07.975.30002
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio GPT.07.975.30002 beinhaltet • contains • contient • contiene • contiene GPT.07.975.19002/B GPT.00.152.35500/B BC.HTA.00.305.30000...
- Page 2 ~ 0.75 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 3 Do not use thread lock: Indicates that no liquid thread lock should be used at this point. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 US.ST.084.02.125 DB.ST.0200.0082.0090.02 DB.ST.0220.0084.0060.02 M6 x 20; DIN 7380 ø 6.4; DIN 9021 M6; DIN 6927 GPT.00.152.002.11 SC.ST.06.020.02.7380.109 US.ST.064.02.9021 MU.ST.06.02.6927.08 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 NOTE: Mounting and disassembly are carried out on the same side! Loosen the screws on both sides of the original luggage rack, and remove it from the bike. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Do not tighten the screws (4) yet. Place the cover in the rear area of the bike. × × × 3 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 × × NOTE: If the SW-MOTECH side carrier is mounted at the same time, screws (8) and (10) as well as four of the washers (11) are omitted. In their place, mount the parts included with the side carrier (*) as well as the parts of the luggage carrier shown in the detailed drawing.
- Page 8 × Tighten screws (9) and (10) according to the bike manufacturer's specifications. 10 Nm × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 TÜV regulations. After assembly, parts that are subject to registration should be entered in the vehicle documents by your test center. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the GPT.07.975.30002 and is the answer not in the manual?
Questions and answers