2-3: Install Memory Modules - Gigabyte GA-2AIEV-RH User Manual

2-3: Install Memory Modules

Before installing the memory modules, please comply with the following conditions:
1. Please make sure the computer power is switched off before installing or removing
memory modules.
The motherboard supports DDR2 memory module, whereby BIOS will automatically detect memory
capacity and specifications. The memory module only can be inserted in one direction.
Installation Steps:
Step 1. Unlock a DIMM socket by pressing the retaining clips outwards. Aling a DIMM on the socket
such that the notch on the DIMM exactly match the notch in the socket.
Step 2. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.
Reverse the installation steps if you want to remove the DIMM module.
Table 1. Supported DIMM Module Type
Size Organization
256MB 8MB x 8 x 4 bks
16MB x 16 x 4bks
512MB 16MB x 8 x 4bks
32MB x 16 x 4bks
1GB 32MB x 8 x 4bks
64MB x 16 x 4bks
2GB 32MB x 8 x 4bks
64MB x 16 x 4bks
Hardware Installation Process
RAM Chips/DIMM
8
16
8
16
8
16
8
16
1 2