Biostar G41D-M7 Bios Manual page 16

G41D-M7 BIOS M anual
APIC ACPI SCI IRQ
Options: Disabled (Default) / Enabled
USB Dev ice Wakeup from S3/S4
T his item allows you to enable or disabled the USB resume from S3/S4 function.
Options: Disabled (Default) / Enabled
High Performance Event Timer
T his item allows you to enable or disabled the HPET.
Options: Disabled (Default) / Enabled
HPET Memory Address
T his item allows you to set the memory address of HPET .
Options: FED00000h (Default) / FED01000h / FED02000h / FED03000h
Resume On Ring
T his item allows you control the wake on ring function.
Options: Disabled (Default) / Enabled
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options: Disabled (Default) / Enabled
Resume On RTC Alarm
When " Enabled", you can set the date and time at which the RT C (real-time clock)
alarm awak ens the system from Suspend mode.
Options: Disabled (Default) / Enabled
RTC Alarm Date (Days)
You can choose which date the system will boot up.
15