Create Raid Arrays - EVGA 122-M2-NF59-TR User Manual

Create RAID Arrays:

Use the MediaShield Creation Wizard to configure your available storage.
After launching MediaShield, start the wizard. Under Management, click Create array
(Figure 2).
Figure 2. Storage Control Panel
2. On the wizard's Welcome screen, note the number of disks available for
configuration (Figure 3).
Figure 3. MediaShield Welcome Screen
3. Click Next to go to the Select Configuration screen (Figure 4).
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 46