Advertisement
EVGA Z68/P67 Motherboard
Align the notches in the processor with the
notches on the socket.
Lower the processor straight down into the socket
with out tilting or sliding it into the socket.
Note:
Make sure the CPU is fully seated and level in
the socket.
Close the load plate over the CPU and press
down while you close and engage the
socket lever.
The CPU installation is complete.
There are many different fan types that can be used with this motherboard.
Follow the instruction that came with your fan assembly. Be sure that the fan
orientation is correct for your chassis type and your fan assembly.
Please note that there are 2 sets of mounting holes, there are holes to be used
for Socket 1156 and 1155 heatsinks and are labeled. The other holes are to be
used for Socket 775 heatsinks.
In most cases, the Socket 1156/1155 mounting holes will be used.
Align notches with notches on the CPU
Advertisement
