Advertisement
Be very careful when handling the CPU. Hold
the processor only by the edges and do not
touch the bottom of the processor.
Use the following procedure to install the CPU
onto the motherboard:
Unhook the socket lever by pushing down and
away from the socket.
Pull the socket lever back and the load plate
will automatically lift. There is a protective
socket cover within the CPU socket to
protect the socket when there is no CPU
installed.
Remove the protective socket cover from the
CPU Socket.
Note:
After removing the CPU socket cover, it is recommended that you keep it
in case you need to remove the CPU so for any reason you can replace
the cover to avoid damaging the CPU socket pins.
EVGA Z68/P67 Motherboard
Advertisement
