Related Manuals for Siemens SN63E806BE
Summary of Contents for Siemens SN63E806BE
- Page 1 SN63E806BE Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 8.5 Folding prongs ...... 2 0 1.1 General information... -
Page 3: Safety
Safety en 14.5 Starting the programme .. 3 1 18 Troubleshooting ...... 4 1 14.6 Interrupting programme .. 3 1 18.1 Clean wastewater pump .. 4 7 14.7 Terminate programme ... 3 1 19 Transportation, storage and 14.8 Switching off appliance... -
Page 4: Restriction On User Group
en Safety ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡... - Page 5 Safety en isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water.
-
Page 6: Safe Use
en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli- ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. - Page 8 en Safety Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
-
Page 9: Preventing Material Damage
Preventing material damage en Modified or damaged water hoses 2 Preventing material may result in material damage and Preventing material damage damage damage to the appliance. Never kink, crush, modify or cut 2.1 Safe installation through water hoses. Only use the water hoses supplied ATTENTION with the appliance or genuine Improper installation of the appliance... -
Page 10: Environmental Protection And Saving Energy
en Environmental protection and saving energy So as not to scratch the finish on sures a particularly economical dry- the appliance, do not use sponges ing result. with a rough surface or abrasive For best drying results wait until the cleaning agents. end of programme before unloading To prevent corrosion, do not use the tableware. -
Page 11: Installing And Connecting The Appliance
Installation and connection en Operating instructions Installing the drainage connection Installation Instructions Consult the installation instructions Further information documents supplied for the steps required Installation material here. Steam protection Connect the wastewater hose to 1 Salt filling aid funnel the outlet connection of the siphon Mains cable using the enclosed parts. -
Page 12: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance Please note that the water safety Insert the mains plug of the appli- system is only functional if there is ance's power cable in a socket a power supply. nearby. The connection data of the appli- Insert the non-heating appliance ance can be found on the rating plug of the power cable into the... - Page 13 Familiarising yourself with your appliance en Rating plate with E number and FD number Page 49 . Rating plate The data you need for Customer Service Page 49 . Add detergent to the detergent dispenser. Detergent dispenser "Detergent", Page 26 Page 20 Bottom basket Bottom basket ...
-
Page 14: Controls
en Familiarising yourself with your appliance 5.2 Controls You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions. 3 4 5 6 Page 30 Switching on the appliance ... -
Page 15: Programmes
Programmes en "Remote Start ", Page 36 Remote Start Timer programming Setting timer programming Page 31 1 Door handle Open the appliance door. The display shows information about the remaining running time or the basic settings. You can change the basic set- Display tings via the display and the setting buttons. - Page 16 en Programmes The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of Page 17 selected. The running time and soiling and the Additional function energy consumption will increase if the rinse aid system is switched off or if rinse aid needs to be added.
-
Page 17: Information For Test Institutes
Additional functions en Programme Programme sequence "Favourite ", Page 17 Favourite Note: The relatively long running time The pre-rinse program is saved to in the Eco 50 ° programme is due to this button at the factory. Pre-rinse is longer soaking and drying times. This suitable for all types of tableware. -
Page 18: Features
en Features Symbol Additional func- tion Half Load Switch on with small loads. It is recommended adding less detergent to the detergent dispenser than for a full ma- chine load. The running time is shortened. Water and energy consumption are reduced. IntensiveZone Switch on with mixed loads containing table- ware with different soiling levels, e.g. -
Page 19: Top Basket
Features en 8.1 Top basket Raise or lower the basket evenly to the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. 1 Knife shelf Release the levers. The basket clicks into position. -
Page 20: Bottom Basket
en Features or for large items of cutlery, e.g. cooking spoons or serving cutlery. 8.5 Folding prongs Use the folding prongs to position If you do not need the cutlery shelf, tableware securely, e.g. plates. you can fold it up. 8.4 Bottom basket Arrange pans and plates in the bot- tom basket. -
Page 21: Cutlery Basket
Before using for the first time en Push the lever forwards and fold 8.6 Cutlery basket down the prongs Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. To use the prongs again, fold them back up. -
Page 22: Water Softening System
en Water softening system Tip: You can change these settings tank, and parts of the appliance may Page 32 and other Basic settings become blocked. at any time. To ensure good dishwashing results, you can treat the water with special salt and the water softening system. 10 Water softening sys- To avoid damage to the appliance, Water softening system... -
Page 23: Special Salt
Water softening system en 10.3 Special salt Add the special salt to the dis- penser. You can use special salt to soften water. Adding special salt If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the pro- gramme starts. -
Page 24: Regeneration Of The Water
en Rinse aid system The water hardness is 0 - 8 °E. Regeneration of the water You do not need to use special softening system after x salt. washing programmes Press . Additional running time in To open the basic settings, press minutes for 3 seconds. -
Page 25: Setting The Amount Of Rinse
Rinse aid system en Add rinse aid up to the max mark. reduces water marks and im- proves the drying result. To save the settings, press for 3 seconds. The amount of rinse aid to be dis- pensed has been set. 11.3 Switching the rinse aid system off If you find the rinse aid refill indicator... -
Page 26: Detergent
en Detergent is non-critical if you remember the fol- 12 Detergent lowing: Detergent Only choose a programme without 12.1 Suitable detergents PreRinse. Only use detergents that are suitable Do not select timer programming for dishwashers. Both separate and for starting the programme. combined detergents are suitable. The dosage can be adjusted to the For optimum washing and drying res- level of soiling. -
Page 27: Unsuitable Detergents
Detergent en automatically to ensure the best pos- with dry hands and only ever place sible washing and drying result. them in a dry detergent dispenser. Even if the rinse aid and special 12.2 Unsuitable detergents salt refill indicators light up, wash- ing programmes will run properly Do not use detergent which could with combined detergents. -
Page 28: Tableware
en Tableware Close the lid of the detergent dis- let collecting tray and dissolve in penser. the right dosage. In order to en- sure that tablets can dissolve evenly, do not place any other ob- jects in the tablet collecting tray. Tip: If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the... -
Page 29: Arrange Tableware
Tableware en Cause Recommendation The water temperature of the pro- Select a programme with lower temper- gramme is too high. atures. After the programme has ended, take glassware and cutlery out of the appli- ance without delay. 13.2 Arrange tableware For better washing and drying res- ults, position items with curves or Arrange tableware correctly to optim- recesses at an angle so water can... -
Page 30: Removing Tableware
en Basic operation Arrange the cutlery drawer so To prevent water dripping on the – that cutlery items do not project tableware, unload it starting at the beyond the upper edge of the bottom and working up. cutlery drawer. Cutlery items that Check the washing tank and ac- project beyond the upper edge cessories for soiling and clean if... -
Page 31: Setting Additional Functions
Basic operation en 14.3 Setting additional func- low the appliance door and on the display. tions Notes You can set additional functions to If you want to add more tableware complete the washing programme while the appliance is running, do selected. not use the tablet collecting tray as Note: The additional functions which a handle for the top basket. -
Page 32: Switching Off Appliance
en Basic settings Press for approx. Tip: If you press during the wash 4 seconds. cycle, the programme currently run- Close the appliance door. ning will be interrupted. When you The programme is cancelled and switch the appliance back on, the ends after approx. 1 minute. programme continues automatically. - Page 33 Basic settings en Basic setting Display text Selection Description tion line. The water temperat- ure should be at least 40 °C and max. 60 °C. Switch hot water on "A01" or off "A00". 1 EmotionLight E00 - E02 Interior light. With the setting "E00"m the interior light is switched off.
- Page 34 en Basic settings Basic setting Display text Selection Description gramme is not indicated by an audible signal tone. autoOpen Dry 1 o00 - o02 Activate or deactivate auto- matic opening of the appli- ance door during the drying phase. If the function has been activ- ated, the running time may in- crease.
-
Page 35: Changing Basic Settings
Home Connect en Basic setting Display text Selection Description The following settings are possible: With the setting "rc0", the function is permanently de- activated. With the setting "rc1", the function can be selected via the button. "Activating Remote Start ", Page 36 With the setting "rc2", the function is permanently ac- tivated. -
Page 36: Setting Up Home Connect
en Home Connect 1 to the WLAN home network (Wi-Fi the function is permanently activated and to the Home Connect app. and you can start your appliance with The Home Connect app guides you a mobile device at any time. through the entire login process. Fol- Activating Remote Start low the instructions in the Home Con- When you have selected "rc1"... -
Page 37: Data Protection
Cleaning and servicing en Press 17 Cleaning and servi- Smart Start is active. Cleaning and servicing cing The programme starts as soon as the optimal time is reached. To keep your appliance working effi- Tip: Deactivate the function a single ciently for a long time, it is important time by pressing to clean and maintain it carefully. -
Page 38: Machine Care
Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing cycle. -
Page 39: Filter System
Cleaning and servicing en Follow the safety instructions given Cleaning filters on the packagings of the machine Soiling in the dishwashing water may care products and machine clean- block the filters. ers. After each wash check the filters Remove any coarse soiling in the for residue. -
Page 40: Cleaning Spray Arms
en Cleaning and servicing Page 12 Clean the filter elements under run- Press the top spray arm ning water. up and rotate anticlockwise as Carefully clean the rim of dirt far as possible between the coarse and the fine fil- ter. Re-assemble the filter system. -
Page 41: Troubleshooting
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. WARNING Risk of electric shock! Improper repairs are dangerous. - Page 42 en Troubleshooting Fault Cause and troubleshooting Display "Check water A technical fault is present. supply" flashes Press . Unplug the appliance or switch off the fuse. Wait at least 2 minutes. Insert the mains plug of the appliance in a socket or switch on the fuse.
- Page 43 Troubleshooting en Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
- Page 44 en Troubleshooting Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump. "Clean wastewater pump", Page 47 Secure the cover of the wastewater pump so it clicks into position.
- Page 45 Troubleshooting en Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. "Controls", Page 14 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
- Page 46 en Troubleshooting Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. "Filter system", Page 39 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. "Programmes", Page 15 Tableware has been precleaned too intensely.
-
Page 47: Clean Wastewater Pump
Troubleshooting en Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub. -
Page 48: Transportation, Storage And Disposal
en Transportation, storage and disposal Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance. -
Page 49: Customer Service
Customer Service en Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner. -
Page 50: Technical Specifications
en Technical specifications to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards. -
Page 51: Statement Of Compliance For Great Britain
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance. - Page 52 en Declaration of Conformity group is seen on the title page. The The manufacturer, BSH Hausgeräte full model identifier is made up of the GmbH deems that it has complied characters before the slash in the with product number (E no.) which can be provision 5.1-1 of ETSI EN 303 found on the rating plate.
- Page 56 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...
Need help?
Do you have a question about the SN63E806BE and is the answer not in the manual?
Questions and answers