Sharp MX-354NR Installation Manual
Sharp MX-354NR Installation Manual

Sharp MX-354NR Installation Manual

Digital multifunctional system
Table of Contents

Advertisement

Quick Links

'13/Oct
2
[1] CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
/M264NV/N314NV/M264NR/M314NR/M354NR
(MAIN UNIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] MX-RP15
(REVERSING SINGLE PASS FEEDER) . . . . . . . . 3-1
[4] MX-VR11 (DOCUMENT COVER). . . . . . . . . . . . . . 4-1
(500/2x500 SHEET PAPER DRAWER) . . . . . . . . . 5-1
[7] MX-FN23 (FINISHER) . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] MX-TE10 (EXIT TRAY UNIT) . . . . . . . . . . . . . . . . . 8-1
[9] MX-TR11 (JOB SEPARATOR) . . . . . . . . . . . . . . . . 9-1
[11] MX-PK11 (PS3 EXPANSION KIT) . . . . . . . . . . . . .11-1
[12] MX-PF10 (BARCODE FONT KIT) . . . . . . . . . . . . 12-1
(NETWORK SCANNER EXPANSION KIT) . . . . . 13-1
[16] AR-SU1 (STAMP UNIT) . . . . . . . . . . . . . . . . . . . . 16-1
(APPLICATION INTEGRATION MODULE) . . . . . 18-1
Parts marked with "
specified ones for maintaining the safety and performance of the set.
INSTALLATION MANUAL
DIGITAL MULTIFUNCTIONAL SYSTEM
2
MODEL
CONTENTS
" are important for maintaining the safety of the set. Be sure to replace these parts with
SHARP CORPORATION
MX-M264U/M264N/
M264NV/M264NR
MX-M314U/M314N/
M314NV/M314NR
MX-M354U/M354N/354NR
(APPLICATION COMMUNICATION MODULE) . . .19-1
(HARD DISK EXPANSION KIT) . . . . . . . . . . . . . . .21-1
[22] MX-KB14 (KEYBOARD) . . . . . . . . . . . . . . . . . . . . .22-1
[23] Dehumidifying heater kit . . . . . . . . . . . . . . . . . . . . .23-1
[24] IC card reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-1
[29] MX-FR37 (DATA SECURITY KIT)-(Common Criteria
Version)) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-1
CODE: 00ZMXM264/I6E
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX-354NR and is the answer not in the manual?

Questions and answers

Summary of Contents for Sharp MX-354NR

  • Page 1: Table Of Contents

    " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used SHARP CORPORATION for after sales service only. The contents are subject to change without notice.
  • Page 2 ‘13/Aug ‘13/Oct CONTENTS Transit, Installation (using) environment, Note [18] MX-AMX1 (APPLICATION INTEGRATION MODULE) 1. Installing (use) conditions ......i 1.
  • Page 3: Symbols In This Manual

    Symbols in this manual The lists of symbols used in this manual are shown below. The meaning of each symbol described in the table must be understood for proper servicing. 1. Symbols used for notes and Symbol Meaning OK/GOOD Indicates a correct cautions procedure or result in an adjustment, etc.
  • Page 4 Symbol Meaning (Work content) Symbol Meaning (Work content) Cleaning Indicates that cleaning is Engage the pawl. (Vacuum) performed with a vacuum cleaner. Cleaning Indicates that cleaning is Screw lock Indicates that a screw is (Brush) performed with a brush. secured with adhesive. Indicates that oil is Unlock applied to lubricate.
  • Page 5 ‘13/Oct CONTENTS Transit, Installation (using) environment, Note [18] MX-AMX1 (APPLICATION INTEGRATION MODULE) 1. Installing (use) conditions ......i 1.
  • Page 6 Symbols in this manual The lists of symbols used in this manual are shown below. The meaning of each symbol described in the table must be understood for proper servicing. 1. Symbols used for notes and Symbol Meaning OK/GOOD Indicates a correct cautions procedure or result in an adjustment, etc.
  • Page 7 Symbol Meaning (Work content) Symbol Meaning (Work content) Cleaning Indicates that cleaning is Engage the pawl. (Vacuum) performed with a vacuum cleaner. Cleaning Indicates that cleaning is Screw lock Indicates that a screw is (Brush) performed with a brush. secured with adhesive. Indicates that oil is Unlock applied to lubricate.
  • Page 8: Transit, Installation (Using) Environment, Note

    Transit, Installation (using) environment, Note MX-M264U Service Manual * About a main unit illustration, it may differ from a target model. 1. Installing (use) conditions (3) Power frequency, waveform The frequency must be within the range of the specified frequency Before installing the machine, check that the following installing 2%.
  • Page 9: Direct Sunlight

    F. Note for handling PWB and electronic parts Humidity RH When handling the PWB and the electronic parts, be sure to observe the following precautions in order to prevent against dam- age by static electricity. • When in transit or storing, put the parts in an anti-static bag or an anti-static case and do not touch them with bare hands.
  • Page 10: Transit And Delivery

    G. Note for proper drum, developing and fusing unit handling When handling the OPC drum and developing units, observe the following items. Drum unit • To prevent damage to the OPC drum, avoid working on the drum unit in high intensity light areas. •...
  • Page 11: Configuration

    ‘13/Oct 1 Å2013.8.23 MX-M264U Service Manual [1] CONFIGURATION System diagram MX-M264U CONFIGURATION 1 – 1...
  • Page 12: Option List

    SHARPDESK 10 LICENSE KIT MX-US50 SHARPDESK 50 LICENSE KIT MX-USA0 SHARPDESK 100 LICENSE KIT MX-UN01A Sharp OSA Network Scanner Tool 1 License Kit MX-UN05A Sharp OSA Network Scanner Tool 5 License Kit MX-UN10A Sharp OSA Network Scanner Tool 10 License Kit MX-UN50A...
  • Page 13: Mx-M264U/M314U/M354U/M264N/M314N/M354N

    ‘13/Oct 1 Å2013.8.23 MX-M264U Service Manual [2] MX-M264U/M314U/M354U/M264N/M314N/M354N/M264NV/M314NV/ M264NR/M314NR/M354NR (MAIN UNIT) C. Packed items check Unpacking A. Unpacking Name Quantity Operation manual D. Lock release (1) Tray rotation plate lock release Pull out the tray. Turn the fixing material and remove it. Remove the caution label.
  • Page 14: Installation

    Installation B. Set the control level for the reference toner density NOTE: When an optional paper feed desk is connected to the With the front cabinet open, connect the power plug to the machine, unpack and install the paper feed desk, then power outlet.
  • Page 15 (2) Tray size setup Pull out the paper tray. Gently pull the tray out until it stops. If paper remains in the tray, remove it. Adjust the guide plates A and B by squeezing their lock levers and sliding them to match the vertical and horizontal dimen- sions of the paper to be loaded.
  • Page 16: Mx-Rp15 (Reversing Single Pass Feeder)

    : ‘16/Apr Service Manual MX-M264U [3] MX-RP15 (REVERSING SINGLE PASS FEEDER) B. RSPF unit attachment Unpacking Attach the RSPF unit to the main unit. A. Packed items check Name Quantity RSPF unit SPF glass unit Installation NOTE: Before installation, be sure to turn both the operation and Remove the rear upper cabinet cover.
  • Page 17: Mx-Vr11 (Document Cover)

    [4] MX-VR11 (DOCUMENT COVER) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity Document cover unit Installation NOTE: Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when per- forming installation.
  • Page 18: Mx-De17/De18/De24 (500/2X500 Sheet Paper Drawer)

    1 Å2013.8.23 MX-M264U Service Manual [5] MX-DE17/DE18/DE24 (500/2x500 SHEET PAPER DRAWER) Unpacking Turn off the main switch of the copier and then remove the power plug of the copier from the outlet. A. Remove the rear cover from the copier Remove the two screws and then remove the rear cover from the copier.
  • Page 19 D. Attach the copier Remove the second and third paper trays. Connect the copier to the paper feed unit using four fixing Place the copier on the optional paper feed unit. plates and two screws (M4 x 12) for each plate. Lower the copier from straight above the optional paper feed unit not to damage the gears on the optional paper feed unit Detailed view...
  • Page 20 H. Change the paper size in the tray For DE24 Hold the grip and slide the tray side plate to adjust it to the paper to be used. Then, fit the rear end plate to the specified size position. Rear plate F.
  • Page 21: Mx-Ds16/Ds17 (Low Stand/High Stand)

    [6] MX-DS16/DS17 (LOW STAND/HIGH STAND) MX-M264U Service Manual Installation Unpacking Attach the adjusters. Unpack the package, and check to confirm that all the parts are Attach the front adjusters (2 pcs.) as shown in the figure below. provided. Front Machine stand Packed parts add adjuster ( 110)
  • Page 22: Back Side

    Put the copier (or the paper feed unit) on the desk. Connect the copier (or the paper feed unit) and the desk with two screws (P tight) and two screws (S tight) packed together Insert the positioning pins (2 pcs.) of the desk into the position- with the copier.
  • Page 23: Mx-Fn23 (Finisher)

    [7] MX-FN23 (FINISHER) MX-M264U Service Manual Installation Unpacking NOTE: Turn off the main switch of the machine and then remove the power plug of the machine from the outlet. Open the front cover. MEMO: When removing the finisher, put your hand beneath the unit and lift it up as shown below.
  • Page 24 Insert the tray paper presence detection harness into the Open the manual feed tray and the right door. dummy connector on the fan duct. Remove the two screws, and remove the right cabinet. Disengage the pawls in the sequence of (1) and (2) and remove the paper exit dummy cover.
  • Page 25 11) Install the rear cabinet to the original position, and fix it with 15) Engage the finisher connection plate with the notch in the stay screw. at the right bottom of the machine. Slide the connection plate to the bottom, and attach M3 screw as shown.
  • Page 26 18) Press the finisher from the front to slide to the rear together 22) Install the left cabinet to the original position. with the connection plate. 19) Fix the connection plate from the front with the M3 screw which are packed with the finisher. 23) Install the finisher front cover from the left side by sliding, and fix the center of the fulcrum point with the resin clip.
  • Page 27 26) Connect the machine connection connector. Non LPS Do not connect to devices other than specified peripheral devices of our company. 27) Attach the staple position label to the document feed unit. MX-M264U MX-FN23 (FINISHER) 7 – 5...
  • Page 28: Mx-Te10 (Exit Tray Unit)

    [8] MX-TE10 (EXIT TRAY UNIT) MX-M264U Service Manual Parts included Remove two screws and remove the right cabinet unit. NOTE: One of the removed screws is used in the step 6). Paper exit unit Paper exit tray Paper holding arm Harness cover OP Paper exit Right paper...
  • Page 29 Wiring 10) Remove the screw and remove the paper exit fan connector sheet. 11) Install the harness cover OP and tightening the screw. Install the paper exit right cover sub and tightening the screw. 3 x 4 screw (S) 2PCS Install the right paper exit actuator and the paper holding arm.
  • Page 30: Mx-Tr11 (Job Separator)

    [9] MX-TR11 (JOB SEPARATOR) MX-M264U Service Manual Parts included Remove the right cabinet AS. M4 x 10 P tight (2pcs) Second paper Job separator unit Second paper exit unit exit tray holder M4 x 10 (5 pcs.) Mylar *Not used. Installation Install the second paper exit UN.
  • Page 31 Remove the paper holding arm, install it to job separator AS. 12) Install the rear cabinet. (Same as the current state) Paper holding arm Install the second paper exit tray holder. (New part) 13) Job separator setting in simulation 26-1. M4 P tight tightening Install the job separator tray AS.
  • Page 32: Mx-Pb15 (Printer Expansion Kit)

    [10] MX-PB15 (PRINTER EXPANSION KIT) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Operation manual Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 33: Mx-Pb15 (Printer Expansion Kit)

    [11] MX-PK11 (PS3 EXPANSION KIT) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM (For Screen Font) Product key sheet Installation NOTE: To install the MX-PK11 (PS3 EXPANSION KIT), the MX- PB15 (PRINTER EXPANSION KIT) is required. A. Enable setting of functions Enter the product key to enable the functions.
  • Page 34: Mx-Pf10 (Barcode Font Kit)

    [12] MX-PF10 (BARCODE FONT KIT) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Product key sheet Installation NOTE: To install the MX-PK11 (PS3 EXPANSION KIT), the MX- PB15 (PRINTER EXPANSION KIT) is required. A. Enable setting of functions Enter the product key to enable the functions.
  • Page 35: Mx-Nsx1 (Network Scanner Expansion Kit)

    [13] MX-NSX1 (NETWORK SCANNER EXPANSION KIT) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Operation manual Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 36: Mx-Fx11 (Facsimile Expansion Kit)

    Service Manual MX-M264U [14] MX-FX11 (FACSIMILE EXPANSION KIT) Unpacking Remove the left cabinet. A. Packed items check Germany Australia France B. I/F cable connection For othe destinations Pass the I/F cable through the hole in the frame to connect to the connector.
  • Page 37 C. Left cabinet and rear cabinet attachment E. Turn ON the power of the main unit Remove the notch in the left cabinet, and attach the left cabi- Connect the power plug of the machine to the power outlet, net. and turn ON the main power switch and the operation panel power switch.
  • Page 38: Mx-Fwx1 (Internet Fax Expansion Kit)

    [15] MX-FWX1 (INTERNET FAX EXPANSION KIT) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Product key sheet Installation NOTE: To install the MX-FR37/FR37U (DATA SECURITY KIT), the MX-HD12 (HARD DISK EXPANSION KIT) is required. NOTE: In order to specify the address of the Internet Fax with the PC-FAX driver, the PC-FAX driver must be updated by the Internet Fax expansion kit.
  • Page 39: Ar-Su1 (Stamp Unit)

    [16] AR-SU1 (STAMP UNIT) MX-M264U Service Manual Unpacking Put the RSPF unit on a stable table with the OC mat upside. A. Packed items check Name Quantity Stamp unit B. Stamp unit attachment Stamp cartridge replacement procedure Open the OC mat. Stamp cartridge Installing screw *1: When replacing the stamp cartridge, Refer to “Stamp cartridge...
  • Page 40: Installation Check

    D. Finish stamp cartridge attachment Install the sensor cover. Open the left cover, and open the document tray. Attach the finish stamp cartridge. Close the OC mat. E. Turn ON the power of the main unit Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch.
  • Page 41: Mx-Fr37/Fr37U (Data Security Kit)

    ’13/Oct ’14/Oct MX-M264U Service Manual [17] MX-FR37/FR37U (DATA SECURITY KIT) 1.Unpacking B. Program ROM attachment 1) Attach the program ROM to the OPT ROM slot of the MFP con- A. Packed items check trol PWB. Common Criteria Validated MFP Data Security Kit Name Quantity OPT ROM...
  • Page 42 ’14/Oct D. Turn ON the power of the main unit c.Selection of functions in the boot mode 1) Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power There are two functions available in the boot mode.
  • Page 43 ’14/Oct 6) Check the result of install (update) of the firmware. Use [UP] key and [DOWN] key to check the results of install (update) of all the firmware programs. Display of firmware update results OK: Update success NG: Update failed Not Update: The update process is not executed.
  • Page 44: Mx-Amx1 (Application Integration Module)

    [18] MX-AMX1 (APPLICATION INTEGRATION MODULE) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM MX-AMX1 GETTING STARTED GUIDE Sharpdesk license kit Operation Manual Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode.
  • Page 45: Mx-Amx2 (Application Communication Module)

    [19] MX-AMX2 (APPLICATION COMMUNICATION MODULE) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Operation manual Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 46: Mx-Amx3 (External Account Module)

    [20] MX-AMX3 (EXTERNAL ACCOUNT MODULE) MX-M264U Service Manual Unpacking A. Packed items check Name Quantity CD-ROM Operation manual Installation A. Enable setting of functions Enter the product key to enable the functions. Enter the system setting mode. The machine enters the product key input mode. Enter the product key.
  • Page 47: Mx-Hd12/Hd12R/Hd13 (Hard Disk Expansion Kit)

    ‘13/Oct 1 Å2013.8.23 MX-M264U Service Manual [21] MX-HD12/HD12R/HD13 (HARD DISK EXPANSION KIT) Installation Unpacking NOTE: Before installation, be sure to turn both the operation and A. Packed items check main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when per- forming installation.
  • Page 48 C. HDD attachment E. Replace the SD card Remove the HDD from the HDD mounting plate. Connect the power plug of the machine to the power outlet, and turn ON the main power switch and the operation panel power switch. Backup the SIM adjustment data in the SD card into the HDD.
  • Page 49: Firmware Version Up

    F. Firmware version up Attach the rear cabinet. Use SIM22-5 to confirm that the version is displayed in the firmware and the watermark. Write the data backed up in the procedure E-2) into the SD card. Enter the SIM56-12 mode, and press [EXECUTE] key and User data restore [YES] key.
  • Page 50: Mx-Kb14 (Keyboard)

    [22] MX-KB14 (KEYBOARD) MX-M264U Service Manual Unpacking Remove the operation panel base plate B from the operation panel base plate A. A. Check the packed items MEMO: When attaching the keyboard, the operation panel base plate B is not used. Name Quantity Keyboard unit...
  • Page 51 E. External fixture attachment Attach the keyboard unit and fix it with the fixing screw (M4 x 8 S-tight, M3 x 8 S-tight). Attach the operation panel base plate. Connect the connector. NOTE: Attach the keyboard unit so that the flat cable is above the keyboard unit.
  • Page 52: [23] Dehumidifying Heater Kit

    : ‘15/May Service Manual MX-M264U [23] Dehumidifying heater kit Parts list Kit name Kit code Part name Part code Q'ty Remarks Heater electric DKIT-0017QSZZ Dehumidifier heater control switch QSW-C9294QCZZ component kit Dehumidifier heater control switch label TLABZ5256FCZZ Supporter LSUPP0140FCPZ WH PWB CPWBF1935FCE1 SCN-WH harness DHAI-0722QSP1...
  • Page 53 : ‘15/May Installation Remove the screw. Remove the Delivery tray cabinet rear. NOTE: Before installation, be sure to turn both the operation and main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when per- forming installation.
  • Page 54 : ‘15/May (3) WH PWB attachment (4) Dehumidifier heater control switch attachment Attach the supporter, and attach the WH PWB. Connect the WH harness to the dehumidifier heater control switch, and attach the dehumidifier heater control switch. Cut away the dehumidifier heater control switch section on the rear cabinet.
  • Page 55 Attach the left cabinet. Tighten the snap band and cut its tip to approx. 5 mm or less. Slide the banding band head to the square hole (Part that is enclosed by the mark). NOTE: The banding band head and cut tip must not protrude behind the heater fixing plate.
  • Page 56 Remove two screws from the scanner bottom. Move the lamp unit by hand and check that it move smoothly in all movable area. NOTE: Check that there is no interference of the harness of the scanner heater in the wire and the 2/3 mirror unit. Connect the harness of the scanner heater.
  • Page 57: [24] Ic Card Reader

    [24] IC card reader MX-M264U Service Manual Installation Preparation NOTE: Before installation, be sure to turn both the operation and A. Supported IC card readers main power switches off and disconnect the power plug from the power outlet. Make double sure that the data lamp on the operation panel does not light up or blink when per- forming installation.
  • Page 58 B. Attachment to the IC card reader holder Attach the IC card reader to the IC card reader holder accord- ing to the attachment reference ribs. Attach the card reader fixing tape to the IC card reader holder referring to the notches as the reference. NOTE: The attachment reference position differs depending on the kind of the IC card reader.
  • Page 59 Holder type C Bind up the cables of the card reader. Y591-EHID-201 v01 NOTE: Cable length is differs depending on type of card (No reference position) reader, bind up the cable followed by the following instructions. Adjust the bind length of card reader cable and bind up it with banding band.
  • Page 60 F. System setting modification Attach the front cabinet upper. IC card reader device registration Device registration Enter the card reader setting menu as shown below. System SettingsAdministrator LoginUser Control Card SettingCard Reader Device Registration Press [Read] button. Disconnect the connector which links the machine and the IC card reader, and then insert it back.
  • Page 61: Setting File For Hid Card Reading

    Setting file for HID card reading (2) Setting of the HID setting file A. Overview Section name Description Decoding\Facility Decode setting of the facility code. This manual describes the following setting procedures for reading Code (* If the facility code is not used, there is no need to data from an IC card by using the HID card reading function: describe this item.) •...
  • Page 62: Card Reading Test

    D. Card reading test After importing the user area setting to the machine, a test can be executed to confirm that the cars is properly read. (* User control > Card area setting > Card reading test (* Only the system settings of the machine)) Execute "User control >...
  • Page 63: Remote Operation Panel Function Enable Setting

    [25] Remote operation panel function Enable setting MX-M264U Service Manual General To use the remote operation panel function, the password for the remote operation panel function must be entered on the password input menu displayed on the VNC boot screen. Note that, therefore, the password must be set in advance to use the remote operation panel function.
  • Page 64: Setting, Adjustments, Operation Check

    [26] Setting, Adjustments, Operation check MX-M264U Service Manual Firmware version check and version After installation of all the options to the machine, use SIM22-5 to check the version of each firmware. If it is not the latest version, upgrade it to the latest one. Function and operation check Check that the following operations are normal.
  • Page 65: [27] Setup And Adjustment Data Recording

    [27] Setup and adjustment data recording MX-M264U Service Manual Print the various setup data and the adjustment data (list) with SIM22-6 and keep the data. • In case of a memory trouble, if the data are not kept, all the adjustments must be made again.
  • Page 66: [28] Necessary Works Before Moving The Machine

    [28] Necessary works before moving the machine MX-M264U Service Manual Remove the following consumable parts from the machine. • Paper • Toner cartridges • Development cartridge Lock the following sections. • Scanner (Optical section) • Paper cassette lift plate NOTE: Since the hard disk drive is built in the machine, use care not to exert vibrations or shocks to the machine when in transit.
  • Page 67 © COPYRIGHT XXXX BY SHARP CORPORATION Since the melting-point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land ALL RIGHTS RESERVED.
  • Page 68 CAUTION FOR BATTERY REPLACEMENT (Danish) ADVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandoren. (English) Caution ! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 69: Trademark Acknowledgements

    Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated. • PCL is a registered trademark of the Hewlett-Packard Company. • Sharpdesk is a trademark of Sharp Corporation. • All other trademarks and copyrights are the property of their respective owners. SHARP CORPORATION...

Table of Contents