thomann T.BONE Tour Guide TG C2 Quick Start Manual

Quick start guide
This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instruc-
tions. Keep the document for future reference. If you pass the product on to others, please include this document.
Contents are subject to change. Please refer to the latest version of the documentation, which is available for download at www.thomann.de.
Safety instructions
Intended use
This device is intended to be used for the wireless transmission of
audio signals, particularly voice transmission during guided tours
and events. Any other use or use under other operating conditions
is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damage resulting
from improper use.
This device may be used only by persons with sufficient physical,
sensory, and intellectual abilities and the necessary knowledge and
experience. Other persons may use this device only if they are su-
pervised or instructed by a person who is responsible for their safety.
Risk of injury and choking hazard for children!

Children can suffocate on packaging material and small
parts. Children can injure themselves when handling the de-
vice. Never allow children to play with the packaging material
and the device. Always store packaging material out of the
reach of babies and small children. Always dispose of pack-
aging material properly when it is not in use. Never allow chil-
dren to use the device without supervision. Keep small parts
away from children and make sure that the device does not
shed any small parts (such as knobs) that children could play
with.
Risk of death from electrical current!

The device contains parts where high voltage is present. Never
remove any covers. There are no user-serviceable parts inside
the device. Do not use the device if covers, safety equipment
or optical components are missing or damaged.
Damage to the device if operated in unsuitable ambient

conditions!
The device can be damaged if it is operated in unsuitable
ambient conditions. Only operate the device indoors within
the ambient conditions specified in the "Technical specifi-
cations". Avoid operating it in environments subject to direct
sunlight, heavy pollution and strong vibrations. Avoid operat-
ing it in environments with strong temperature fluctuations.
If temperature fluctuations cannot be avoided (for example
after transport in low outside temperatures), do not switch on
the device immediately. Never subject the device to liquids or
moisture. Never move the device to another location while it
is in operation. In environments with increased dirt levels (for
example due to dust, smoke, nicotine or mist): Have the device
cleaned by qualified specialists at regular intervals to prevent
damage due to overheating and other malfunctions.
Features
ƒ Two charging slots for bodypack transmitter TG 16 T and
bodypack receiver TG 16 R
ƒ Separate indicator LED for each charging slot
ƒ Power supply via supplied power adapter
Damage to the external power supply due to high voltages!

The device is powered by an external power supply. The ex-
ternal power supply can be damaged if it is operated with the
incorrect voltage or if high voltage peaks occur. In the worst
case, excess voltages can also cause a risk of injury and fires.
Make sure that the voltage specification on the external power
supply matches the local power grid before plugging in the
power supply. Only operate the external power supply from
professionally installed mains sockets that are protected by
a residual current circuit breaker (FI). As a precaution, discon-
nect the power supply from the power grid when storms are
approaching or if the device will not be used for a longer pe-
riod.
Damage to the device due to use of unsuitable external

power supplies!
If the device is operated with an unsuitable external power
supply, the device can be damaged by overvoltage or in-
correct polarity. In extreme cases, using an unsuitable power
supply can also cause a risk of injury and fire. Only use the
external power supply designated for the device or an equiv-
alent external power supply with identical parameters. If in
doubt, compare the voltage specifications on the external
power supply and the polarity (+/-) with the specifications in
this manual and printed on the device. Voltage and polarity
must always match.
General handling
To prevent damage, never exert force while operating the device.
Never immerse the device in water. Wipe only with a clean and dry
cloth. Do not use liquid cleaners such as benzene, thinners or flam-
mable cleaning agents
Keep foreign substances away from the device!
Keep the device away containers with liquid. If any liquid penetrates
the device, this could destroy the device or cause a fire. Ensure that
no metallic parts enter the device.
Tour Guide TG C2
EN