Toshiba TS605 Technical & Service Manual page 99

Mobile Communications Division
Customer Services
The bonding particles are the small white dots that you can see on the clear
tape. Or you can use ACP or Anisotropic Conductive Paste.
There is a very much set process when it come to replacing ACF Parts.
There is a cheap way, which is highly unreliable and not authorised and
there is the correct way.
You must consider the type of environment that is required for ACF
replacement.
ESD
Dust, Ionized Atmosphere
Correct Tape or paste
Temperature controlled spot Heater
ESD Tools
ACF Hot Bar Machine
Handset Specific Jig
All of these Items are essential. Please consider the following Pictures:
ACF Hot Bar Machine
Version 1.0 14/08/2006
Created by Konrad Szombara Page 99 of 103