Access Points - Nokia 002Q944 User Manual

● Operator selection — Select Automatic to set the device to search for and
select one of the available networks, or Manual to manually select the network
from a list. If the connection to the manually selected network is lost, the device
sounds an error tone and asks you to reselect a network. The selected network
must have a roaming agreement with your home network.
● Cell info display — Set the device to indicate when it is used in a cellular network
based on microcellular network (MCN) technology and to activate cell info
reception.

Access points

Create a new access point
Select Menu > Settings and Connectivity > Destinations.
You may receive access point settings in a message from a service provider. Some
or all access points may be preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
When you open one of the access point groups (
access point types:
indicates a protected access point
indicates a packet data access point
To create a new access point, select
available connections. After the search, connections that are already available are
shown and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
● Connection name — Enter a name for the connection.
● Data bearer — Select the data connection type.
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with Must be defined or with a red *. Other fields
can be left empty, unless your service provider has instructed otherwise.
© 2009 Nokia. All rights reserved.
, ,
Access point. The device asks to check for
, ), you can see the
111