Table of Contents
Advertisement
For international calls, select * twice for the + character (which replaces the
international access code), and enter the country code, area code (omit the
leading zero if necessary), and phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the end key.
Pressing the end key always ends a call, even if another application is active.
To make a call from the contacts list, select Menu > Contacts. Go to the desired
name. Or, select the search field, enter the first letters or characters of the name,
and go to the name. To call the contact, press the call key. If you have saved several
numbers for a contact, select the desired number from the list, and press the call
key.
During a call
To mute or unmute the microphone, select
To put a call on hold or activate the held call, select
To switch back to the handset, select
To end the call, select
To switch between the active and held calls, select Options > Swap.
Tip: When you have only one active voice call, to put the call on hold, press
the call key. To activate the held call, press the call key again.
To send DTMF tone strings (for example, a password), select Options > Send
DTMF. Enter the DTMF string or search for it in the contacts list. To enter a wait
character (w) or a pause character (p), press * repeatedly. To send the tone, select
OK. You can add DTMF tones to the phone number or DTMF field in contact details.
To end an active call and replace it by answering the waiting call, select Options >
Replace.
To end all your calls, select Options > End all calls.
© 2010 Nokia. All rights reserved.
.
.
or
.
or
.
Make calls
37
Advertisement
Table of Contents
