Page 1
OFF-ROAD CRAWLER NO.EX86130 he product has conducted IQC (Input Quality Control) and full inspection before delivery. The manufacturer is responsible for quality assurance. Remote Control model is assembled manually, and then there may have some defects in the production process. Once the product is modified or incorrect operation, it cannot apply for replacement and return services, for the parts and accessories may be damaged.
Page 2
Thanks for purchasing our RC car. The power system for RC model can be very dangerous, so please read this manual carefully. In that we have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product.
Page 3
4-1.Install Charged Batteries In Car. 1. Please read the manual carefully and prepare the following things before use. 4.0mm Please rotate the button as shown, remove the bodyshell (disconnect the bodyshell cable to avoid damge when removing the bodyshell), 4.5mm then install the prepared battery pack.
Page 4
4-3. Battery Specifications for Product 5-1. XA8E-150 2.4GHZ Radio System WARNING: NO battery includes in factory.Recommend?battery: 2S~3S LIPO battery or 5-9 cells NIMH battery Voltage Return LED (please match the ESC mode with the corresponding battery type)Pay attention to the battery size and plug CH3 -LED Steering Trim specification when purchasing.The maximum battery measurement is 142*48*55mmЈLxWxH).
Page 5
5-4 Servo Winch Hook Function 5-3. Transmitter Steering and Throttle Instruction 1. Press and hold CH4 button (LED is on), the winch turns in anticlockwise, the hook stretches, release the button, Note: the stretch action stops. Please trim the Throttle Trim (TH. Trim) until the vehicle stops in case the vehicle goes forwards or backwards Note: the hook requires external force to stretch.
Page 6
5-6. Shifting the High-Low Transmission Factory Setting Low Gear High Gear Please stop or slow down the vehicle when shifting gear, from low-speed to high-speed Press CH6 button, the button light is on, switch to high- or from high-speed to low-speed, in order to make the shift operation more smoother and speed gear protect the gear.
9. Troubleshooting 7. EX86130 Challenger Specifications Problem Possible Cause Solution Electronic plugs loose or fall off Switch off and reconnect 512mm Vehicle battery not charged, 20.15in activating the ESC low voltage Replace/recharge the vehicle battery cut-off to protect the battery Motor or ESC dirty or damaged replace new Motor (recommend to purchase facoty Motor) Car does not...
Page 10
Shock Absorber Assembly Main Body( Center Right) Main Body (Center Left) R86060 R86594 R86743 (3*10) (2.3mm) R86731 R86724 R86725 Front Suspension Linkage Installation R86061 R86724 (3*12) R86067 (3*28) Main Body (Front Right) Main Body (Front Left) R86067 (3*28) R86060 R86723 (3*10) R86731 R86017...
Need help?
Do you have a question about the PRO RUNNER EX86130 and is the answer not in the manual?
Questions and answers