Table of Contents
Advertisement
Quick Links
ASSEMBLY
INSTRUCTIONS
ELVB-26
Connection-Set for single core heating cable
ELKM -AS; -AE
with 1.5mm² single core cold supply lead /
supply cable 3x1.5mm²
eltherm GmbH
Ernst-Heinkel-Strasse 6 -10
57299 Burbach, Germany
P.: +49 2736 4413-0
QAA-026
F.: +49 2736 4413-50
info@eltherm.com
Rev.05
www.eltherm.com
Advertisement
Table of Contents
Related Manuals for eltherm ELVB-26
Summary of Contents for eltherm ELVB-26
- Page 1 ASSEMBLY INSTRUCTIONS ELVB-26 Connection-Set for single core heating cable ELKM -AS; -AE with 1.5mm² single core cold supply lead / supply cable 3x1.5mm² eltherm GmbH Ernst-Heinkel-Strasse 6 -10 57299 Burbach, Germany P.: +49 2736 4413-0 QAA-026 F.: +49 2736 4413-50 info@eltherm.com...
-
Page 2: Table Of Contents
We reserve the right to make technical changes. Changes, errors or misprints shall not form the basis for any claim to compensation for damages. Comply with the applicable and currently valid standards and regulations for safety-related components and systems. QAA-026 Document: eltherm GmbH 86430409110XX Assembly instructions ELVB-26 Ernst-Heinkel-Str. 6-10 57299 Burbach T.: +49 2736 4413-0 Author: Felix Kind Date: 20.05.2016... -
Page 3: Recommended Tools
QAA-026 Assembly instructions ELVB-26 Revision 05 RECOMMENDED TOOLS CONTENTS OF CONNECTION SET ELVB-26 (Art.No. 0911052, for ELKM-AE & AS) Type Units PTFE-FEP shrink sleeve Ø 6.4 mm; l = 35 mm; transp. 4 Units PTFE-FEP shrink sleeve Ø 8.9 mm; l = 130 mm; transp. 2 Units Nickel sleeve 4.0 x 0.4 x 9.0 mm;... -
Page 4: Option 1: Heating Cable - Cold Cable
OPTION 1: HEATING CABLE - COLD CABLE PREPARATION Preparation heating cable (on both sides of the heating cable) Slide on the heat-shrink tubing (1) ATTENTION Do not damage the protective! 5 0 m Push braiding wires apart Pull cold lead through Stretch braiding, do not twist 5 0 m 1 0 m... -
Page 5: Preparation Cold Cable Junction Box Side (Prepare 2 Times)
QAA-026 Assembly instructions ELVB-26 Revision 05 Preparation cold cable junction box side (prepare 2 times) • Attach the cable gland (part of the junction box). 1 2 5 m • Remove the outer sheath. ATTENTION Do not damage the protective! -
Page 6: Connection Heating Cable - Cold Cable
CONNECTION HEATING CABLE - COLD CABLE • Insert and crimp the heating cable & braid into nickel sleeves (3 or 4, depending on the total cross-section). • Push the heat-shrink tubing (1) approx. 5 mm to the end of the insulation and shrink. •... -
Page 7: Preparation Power Cable (Prepare 2 Pices)
QAA-026 Assembly instructions ELVB-26 Revision 05 Preparation power cable 3x1.5mm² ( prepare 2 pices) Junction box side Heating cable side 1 0 m 5 5 m 1 0 m 3 0 m Push on the cable gland (part of the housing). -
Page 8: Eltherm Gmbh
• Slide the heat-shrink tubing (2) onto the centre of the crimp connection and shrink. This document can also be found on the eltherm website. Visit our download area. eltherm GmbH Ernst-Heinkel-Straße 6 -10 57299 Burbach. Germany T.: +49 2736 4413-0...
Need help?
Do you have a question about the ELVB-26 and is the answer not in the manual?
Questions and answers