Table of Contents
Advertisement
Available languages
Available languages
Quick Links
BI SERIES –
UTILITY BLOWERS
Operation Instructions & Parts Manual
READ AND SAVE THESE INSTRUCTIONS
BI SERIES UTILITY BLOWERS MODELS: BI-10 – BI-36; BI-10RM – BI-36RM
GENERAL SAFETY
Rotating parts (pulleys, shafts, belts) on fans should not be exposed. Where these components are not protected by ductwork, cabinets or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be opened with the fan operating
to avoid foreign objects being drawn into the system. On initial start-up a careful inspection should be carried out to ensure no foreign material
is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi BI/BI – RM series blowers.
Failure to comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference.
BEFORE YOU BEGIN
Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate the blower wheel by
hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi to establish clearance, re-tighten bolts.
UNIT DESCRIPTION
Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a backwardly inclined (BI)
blade configuration to generate air moving performance. The BI series are single inlet blowers,which have a standard CCW rotation. The discharge
direction may be easily altered to any one of eight positions without removal of the wheel venturi or housing.
Installation or Product problems? Do not return to store of purchase.
Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)
1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.
Canarm Ltd. - Corporate Head Office
www.canarm.com
BI_BIRM_UserGuide 26/02/2025
* Flexible inlet and outlet collars are recommended to minimize
vibration transmission.
2157 Parkedale Avenue, PO Box 367
Tel: (613) 342-5424; Fax: (613) 342-8437
" # #
Brockville, Ontario Canada K6V 5V6
hvacsales@canarm.ca
!
Page 1 of 4
Advertisement
Table of Contents
Related Manuals for Canarm BI Series
Summary of Contents for Canarm BI Series
- Page 1 UNIT DESCRIPTION Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a backwardly inclined (BI) blade configuration to generate air moving performance. The BI series are single inlet blowers,which have a standard CCW rotation. The discharge direction may be easily altered to any one of eight positions without removal of the wheel venturi or housing.
-
Page 2: Installation
BI SERIES UTILITY BLOWERS INSTALLATION 1. Secure the exhauster to the curb cap or sleepers (supplied by others) through the 3/4” diameter holes provided in the base of the motor compartment and leg. For proper motor compartment ventilation, if the unit is mounted on a floor or solid surface, provide a minimum 1”... -
Page 3: Operation
BI SERIES UTILITY BLOWERS OPERATION After electrical connections are completed, energize the unit momentarily and ensure that the rotation of the wheel is correct. Apply full power. With the air systems in full operation and all ducts and access panels attached, measure current input to the motor and ensure that it is less than the rated full load motor amperage. -
Page 4: Parts List
WARRANTY Canarm Ltd. Air Moving products are guaranteed for a period of one year against manufacturing defects in material and workmanship when operating under normal conditions. Liability is limited to the replacement of defective parts. Labour and transportation costs are not included. -
Page 5: Avant De Débuter
DESCRIPTION DE L'UNITÉ Les ventilateurs de série BI de Canarm/Delhi sont conçus spécifiquement comme étant des ventilateurs silencieux et efficaces. La série BI intègre une configuration de lame inclinée vers l’arrière (BI) pour générer des déplacements d’air performants. Les ventilateurs de la série BI possèdent des entrées uniques, qui ont une rotation CCW standard. - Page 6 SÉRIE BI SOUFFLEURS UTILITAIRES INSTALLATION 1. Sécurisez le ventilateur au capuchon de la bordure ou aux traverses (fournis par autrui) à travers les trous de ¾’’ de diamètre prévus dans la base du compartiment du moteur et du pied. Pour une ventilation adéquate du compartiment du moteur, si l’unité est installée au plancher ou sur une surface solide, prévoyez un minimum de 1’’...
-
Page 7: Opération
SÉRIE BI SOUFFLEURS UTILITAIRES OPÉRATION Une fois les connexions Électriques terminées, mettez momentanément l’appareil sous tension et assurez-vous que la rotation de la roue est correcte. Appliquez ensuite la pleine puissance. Avec le système d’air en plein fonctionnement et tous les conduits et panneaux d’accès attachés, mesurez le courant du moteur et s’assurer qu’il est inférieur à... -
Page 8: Entretien
WARRANTY Les produits de ventilation Canarm LTD sont garantis pour une période d’un an contre tout défaut de fabrications dans les matériaux et la fabrication lorsqu’ils fonctionnent dans des conditions normales. La responsabilité est limitée au remplacement des pièces défectueuses. Les coûts de main-d’œuvre et de transport ne sont pas inclus.
Need help?
Do you have a question about the BI Series and is the answer not in the manual?
Questions and answers