INTRODUCTION Congratulations and t The Canarm Cyclone fan is the first fan designed especially for the dairy industry and cooling cows. It transfers electrical energy into air energy and focuses the air in a controlled pattern. It is a recirculation fan that is designed to move a large volume of air and to provide significant airspeed in the occupied zones of dairy barns or other livestock buildings (See figures 1).
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com PROPER DESIGN AND INSTALLATION Your sales professionals have given you a recommendation for fan placement, orientation and system operation.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com PRODUCTS RECEPTION We recommend you to receive this system in a coordinated and verified manner, in order to avoid lost time due to misplaced equipment.
You can also add one of our temperature controls that can be wired to the VFD and change the speeds based on temperature, time or humidity. Visit Canarm.com or call our technical support line 1-800-260-5314 for a list of Canarm approved controls. It is important that controls are sized properly for the amp loading of the fan.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com OVERVIEW OF THE PROJECT MECHANICAL INSTALLATION PREPARING TO INSTALL THE FAN Review this entire manual with the installation team and share information with necessary personnel.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com 3.1.2 INSTALLATION OF THE AIR IN NTAKE If the air intake is not installed when th he fan is delivered, follow these instructions otherwise s skip to the next step.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com DIRECTIONS FOR HANGING/MOUNTING THE CYCLONE CEILING SUSPENDED Install the fans in the locations directed by your system provider.
WALL OR COLUMN INSTALLATI Wall brackets could be mounted to columns or walls (see figure 7). Canarm can provide the steel arm kit for existing 6"x8" or an 8"x8" post fixation (part# FGCY-MNTKIT). Hardware description is provided with the kit.
Heavy gauge steel base, with concrete anchors, is provided for a solid mount. Contact your Canarm rep for pricing and part numbers, or email agsales@canarm.ca Figure 8 - Cyclo one Plus install on post, horizonta ally and at 30 degree angle Sept.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com ASSEMBLY REQUIRED WITH THE CYCLONE IN THE AIR DEFLECTOR SUPPORT BRACKETS Deflector support Brackets are to be installed inside and on opposite flat sides of the cyclone housing.
WARRANTY CANARM Ltd. warrants every new fan to be free of defects in material and workmanship, to the extent that, within a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option, any unit or part thereof, returned freight prepaid, and found to be defective.
VFD PROGRAMMING NOTES By default, VFD should be programmed for the installation and ready to operate right off the box. . In case of trouble, refer to the VFD Instruction Manual before programming VFD or call Canarm Service department at 1-800-260-5314.
7686 16 Line, Arthur, ON. 4000 AVE. PINARD, ST-HYACINTHE, N0G 1A0 QUÉBEC, CANADA, Email: agsales@canarm.ca J2S 8K4, Tel: 1-800-263-5314 TEL: 450-383-4000, Fax: 519-848-3948 FAX: 450-383-4004 PUTTING INNOVATION TO WORK www.canarm.com www.ventecventilation.com GREASING PROCEDURE FOR CYCLONE PLUS 72 This following greasing procedure applies only to the Cyclone Plus 72. This procedure must be done each year.