Advertisement
Available languages
Available languages
Quick Links
9200 SERIES
BLOWERS
INSTALLATION AND MAINTENANCE INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY
Rotating parts, (pulleys, shafts and belts) on fans should not be exposed. Where
these components are not protected by ductwork, cabinets or covers, appropriate
guards should be employed to restrict exposure to rotating parts. Access doors
should not be opened with the fan operating to avoid foreign objects being drawn
into the system. On initial start-up, a careful inspection should be carried out to
ensure no foreign material is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install,
operate or service Canarm/Delhi 9200 Series. Failure to comply with instructions
could result in personal injury and/or property damage.
Retain instructions for future reference.
BEFORE YOU BEGIN
Inspect unit for damage, report any shipping damage to carrier. Check all fasteners, re-tighten as required. Rotate the blower wheel by
hand to ensure free rotation. If rubbing occurs, loosen the set screw(s), re-position the wheel to the shaft center, re-tighten set screws.
INSTALLATION
9200 series blowers are suitable for suspension or base mounting.
SUSPENSION MOUNTING
Drill 4 - 7/8" diameter holes through the top using the inside top "hat section" channel as a guide. Extend 1/2" diameter threaded
mounting rod through the cabinet and the bottom channel and secure to both top and bottom. Ensure unit is level.
BASE MOUNTING
For base mounting secure unit through 4 - 7/8" diameter holes located in the "hat section" channel in the bottom of the unit. Ensure
unit is level.
RIGID MOUNT
9200 SERIES
BLOWERS
* Flexible inlet and outlet collars are recommended to minimize vibration transmission.
Installation or Product problems? Do not return to store of purchase.
Contact Canarm Service at 1-800-265-1833 (CANADA) 1-800-267-4427 (U.S.A.)
1-800-567-2513 (EN FRANCAIS) Monday to Friday 8:00 - 5:00pm e.s.t.
Canarm Ltd. - Corporate Head Office
www.canarm.com
9200_9200_VIB_UserGuide_02_09_2023
BASE MOUNT
RUBBER
ISOLATOR
OR
2157 Parkedale Avenue, PO Box 367
Tel: (613) 342-5424; Fax: (613) 342-8437
SUSPENDED MOUNT
OR
RIGID
SPRING
MOUNT
ISOLATOR
Brockville, Ontario Canada K6V 5V6
9200 SERIES
BLOWERS
hvacsales@canarm.ca
Page 1 of 3
Advertisement
Related Manuals for Canarm 9200 Series
Summary of Contents for Canarm 9200 Series
- Page 1 Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi 9200 Series. Failure to comply with instructions could result in personal injury and/or property damage.
- Page 2 9200 SERIES BLOWERS MOTOR, PULLEYS & BELTS (See Table below) 1. Mount the blower pulley on the blower shaft and tighten the set screw securely on the key of the shaft. 2. Mount the motor pulley on the motor shaft. Leave some clearance between the pulley and the motor end bell. Tighten the set screws on the key of the motor shaft.
-
Page 3: Operation
WARRANTY CANARM Ltd. warrants every new product to be free of defects in material and workmanship, to the extent that, within a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option, any unit or part thereof, returned freight prepaid, and found to be defective. - Page 4 Conservez les instructions pour référence future. N.B.: Aucune réclamation ne sera honorée par Canarm Ltée. à moins d'autorisation obtenue au préalable. AVANT DE DÉBUTER Inspectez l’unité pour détecter tout dommage et rapporter tout dommage causé par le transport au transporteur. Vérifiez toutes les fixations, resserrez si nécessaire.
- Page 5 VENTILATEUR SÉRIES 9200 MOTEUR, POULIES & COURROIES (Voir table ci-dessous) 1. Montez la poulie du ventilateur sur l’arbre du ventilateur et serrez fermement la vis de réglage sur la clavette de l’arbre. 2. Montez la poulie du moteur sur l’arbre du moteur. Laissez un jeu entre la poulie et la cloche côté moteur. Serrez les vis de réglage sur la clavette de l’arbre du moteur.
-
Page 6: Opération
Canarm Ltée. garantie que chaque nouveau produit ne comporte aucune défectuosité dans le matèriel et la main-d'oeuvre, et de ce fait, Canarm Ltée. remplacera ou réparera à son choix, tout unité ou partie de cette unité qui comporte une defectuosité, pour une période de un an suivant la date d'achat.