Connection Settings - Nokia 002J3H6 User Manual

To set the default call type, select
type and select Voice call
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select
SMS > Yes. To set the text for the message, select
Call Message text.
>
To set off the contact search on the home screen, select
Call Contact search > Off.
>
Network settings
Select Menu Tools
> >
Network.
To select the network mode, select
and Dual mode, UMTS, or GSM. In the dual mode, the
device switches automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and
reduce the battery life. In regions close to both
GSM and UMTS networks, selecting
may cause constant jumping between the two
networks, which also increases the demand on
battery power.
To select the operator, select
Manual to choose from available networks, or
Automatic to have the device select the network
automatically.
To set the device to indicate when it is used in Micro
Cellular Network (MCN), select
On.
Call Default call
>
if you make a GSM calls, or
Call Reject call with
>
Settings Phone
> >
Network mode
Dual mode
Operator selection
Cell info display
>

Connection settings

Select Menu Tools
>
Select from the following:
Bluetooth — Edit the Bluetooth settings.
•
and receive data with Bluetooth", p. 99.
USB — Edit the data cable settings.
•
cable", p. 98.
Access points
•
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
Packet data — Determine when packet data
•
connections are used, and enter the access point if
you use your device as a modem for a computer.
Wireless LAN
•
an indicator when a WLAN is available, and how
often the device searches for networks.
SIP settings — View or create session initiation
•
protocol (SIP) profiles.
Internet tel. — Define settings for net calls.
•
Configurations
•
from which your device may receive configuration
settings.
APN control — Restrict packet data connections.
•
See "Restrict packet data", p. 126.
and
Access points
Select Menu Tools
>
Access points.
An internet access point is a collection of settings,
which define how the device creates a data connection
Settings > Connection.
>
See "Data
— Set up new or edit existing access
— Determine if the device displays
— View and delete trusted servers
Settings Connection
> >
See "Send
>
121