Portwell PEB-2274 User Manual

3.5" embedded motherboard board

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

PEB-2274

3.5" Embedded Motherboard Board

Version 1.2

PEB-2274

User's Guide

Table of Contents

Need help?

Do you have a question about the PEB-2274 and is the answer not in the manual?

Questions and answers

Summary of Contents for Portwell PEB-2274

Page 3: Table Of Contents
5.3.2 Intel® UHD Graphics ......................................34 5.3.3 Intel LAN I210IT Gigabit Ethernet Controller ................................ 34 BIOS Setup Items ..........................................35 7.2 BIOS Setup ........................................35 6.2.1 Main ............................................. 37 6.2.2 Configuration ........................................39 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 4 6.2.6 Save & Exit ........................................... 77 Troubleshooting ............................................. 79 7.1 Hardware Quick Installation ....................................79 7.2 BIOS Setting ............................................ 81 7.3 FAQ…… ......................................... 82 Portwell Software Service ........................................91 9 Industry Specifications ..........................................92 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 5: Warranty
Portwell provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. Portwell assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
Page 6: Technical Support
Warranty”). Portwell may in its sole discretion modify its Limited Warranty at any time and from time to time. Beginning on the date of shipment to its direct customer and continuing for the published warranty period, Portwell represents that the products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or due to non conformance to the agreed upon specifications, will be repaired or exchanged, at Portwell’s option and expense.
Page 7: Introduction
Atom x6425E, includes integrated, enhanced graphics and memory controllers on 10nm process technology, delivering significant power reduction and performance improvements. The PEB-2274 can provide the low power consumption for low profile fanless applications such as POS, Print Imaging, ATM, Kiosk, Medical, Panel PC, Digital Security and Digital Signage.
Page 8: Specifications
USB Port: 4x USB 3.2 Gen2 ports on rear I/O, 1x USB 2.0 Header support additional 2 x USB2.0 ◆ Input/Output connectors Audio Interface: Mic-In and Line-Out ◆ Ethernet Supports 2 x Intel® i210IT with 2 x RJ-45 ◆ High Drive GPIO One pin-header for GPIO(8bit in / out) ◆ Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 9: Supported Operating Systems
Power supply voltage: 9V-36V DC in ◆ Board size: 146 x 105 mm ◆ Safety CE, FCC ◆ 2.1 Supported Operating Systems The PEB-2274 supports the following operating systems. Windows 10* (64 bit), IoT Enterprise   Ubuntu Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 12: Power Consumption
Audio Driver Realtek ®Audio Driver,Version:6.0.9244.1 Power Supply FSP GROUP INC. FSP120-AHAN1 M.2 (E-Key) Wi-Fi Module Intel® Wireless-AC 9260 (9260NGW) M.2 (M-Key) SSD Card WARIS 32GB M.2 2242 SSD (TS46EMM) Hard Drive KINGSTON 128GB Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 13: Environmental Specifications
1.73A 1.98A 2.12A Device +12V 0.16A 0.15A 0.17A Device +5V 0.30A 0.32A 0.36A USB3.0 Loading Test 4.80V/0.96A 2.4 Environmental Specifications Storage Temperature : -40~85°C Operation Temperature : -40~85°C Humidity: 10 ~ 95% non-condensing Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 15: Hardware Configuration
PEB-2274 4 Hardware Configuration 4.1 Jumpers and Connectors This chapter indicates jumpers, headers, and connector’s locations. Users may find useful information related to hardware settings in this chapter. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 16: Jumper Settings
4.2 Jumper Settings For users to customize PEB-2274’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Page 17 Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds. Plug the power cord and trun ON the computer. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 20 Serial Port connector Chassis intrusion connector DIMM slot COM Debug connector Fan connector Nano SIM Card slot USB 2.0 connector SATA Power connector DC-in Power connector SATA connector I2C connector SMBus connector SPI TPM connector Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 27 PEB-2274 11 : Nano SIM Card slot 12 : USB 2.0 connector WARNING: Do Not Connect a 1394 cable to the USB connectors. Dling so will damage the motherboard. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 33: System Resources
Atom™ x6425E Processor(12C, 1.5M Cache, up to 3.00 GHz) 5.2 Main Memory PEB-2274 provides 1 x 204-pin SO-DIMM sockets which supports DDR4 non-ECC memory. The maximum memory can be up to 32GB. Memory clock and related settings can be detected by BIOS via SPD interface.
Page 34: Chipset Component Driver
5.3.1 Chipset Component Driver The PEB-2274 build with Intel® Atom™ processor x6425E . It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 10, please install its INF before any of other Drivers are installed.
Page 35: Bios Setup Items
The BIOS setup program provides a General Help screen. The menu can be easily called up from any menu by pressing <F1>. The Help screen lists all the possible keys to use and the selections for the highlighted item. Press <Esc> to exit the Help Screen. Copyright © Portwell 2024 PEB-2274...
Page 38 The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. System Time Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 40 Selects TPM device: PTT or dTPM. PTT-Enable PTT in SkuMgr dTPM1.2 –Disables PTT in SkuMgr TPM Device Selection ★dTPM, PTT Warning! PTT/ dTPM will be disabled and all data saved on it will be lost. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 41 Trusted Computing Settings Feature Description Options Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG ★Enable, Disable Security Device Support EFI protocol and INT1A interface will not be available. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 42 PEB-2274 CPU Configuration CPU Configuration Parameters Feature Description Options Intel (VMX)Virtualization When enabled, a VMM can utilize the additional hardware capabilities provided by ★Enabled ,Disabled Technology Vanderpool Technology. VT-d ★Enabled ,Disabled VT-d capability Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 44 If value is 0, BIOS will program this value as 1.25*TDP. For 12.50w, enter Power Limit 2 ★0 12500. Processor applies control policies such that the package power does not exceed this limit. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 45 PEB-2274 Graphics Configuration Graphics Configuration Feature Description Options ★Enabled, Disabled RC6(Render Standby) Check to enable render standby support. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 46 Serial Port 3 Configuration Set Parameters of Serial Port3(COMC) Serial Port 4 Configuration Set Parameters of Serial Port4(COMD) Serial Port 5 Configuration Set Parameters of Serial Port5(COME) Serial Port 6 Configuration Set Parameters of Serial Port6(COMF) Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 47 PEB-2274 Serial Port 1 Configuration Feature Description Options ★Enabled ,Disabled Serial Port Enable or Disable Serial Port (COM) COM1 Control Select COM1 mode. RS232, RS422 or RS485 ★RS232,RS422,RS485 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 48 PEB-2274 Serial Port 2 Configuration Feature Description Options Serial Port Enable or Disable Serial Port (COM) ★Enabled ,Disabled COM2 Control Select COM2 mode. RS232, RS422 or RS485 ★RS232,RS422,RS485 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 53 Console Redirection [Enabled] The settings specify how the host computer and the remote computer (which the user is Console Redirection Settings using) will exchange data. Both computers should have the same or compatible settings. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 55 With this mode enabled only text will be sent. This is to capture Terminal data. ★Disabled, Enabled Resolution 100x31 Enables or disables extended terminal resolution ★Disabled, Enabled ★VT100, LINUX,XTERMR6, SCO, ESCN, Putty KeyPad Select FunctionKey and KeyPad on Putty VT400 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 56 ★Enabled , Disabled Enable/Disable SATA Device. SATA Mode Selection Determines how SATA controller(s) operate. ★AHCI ★Enabled , Disabled M.2 M-Key(SATA) Enable or Disable SATA Port SATA6G ★Enabled, Disabled Enable or Disable SATA Port Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 57 Enable/Disable IPv4 PXE boot support. If disable, IPv4 PXE boot support will not be available. ★Disabled, Enabled Ipv6 PXE Support Enable/Disable IPv6 PXE boot support. If disable, IPv6 PXE boot support will not be available. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 59 USB devices plug into the connector will not be detected by BIOS or OS. Enable/Disable this USB Physical Connector (Physical port). Once disabled, any USB1~2 ★Enabled, Disabled USB devices plug into the connector will not be detected by BIOS or OS. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 62 I2C Controller ★Enabled, Disabled Enable/Disable I2C Controller ★Disabled, Enabled In-Band ECC Enable/Disable In-Band ECC ★Enabled, Disabled PCIE Port(WiFi) Enable/Disable M.2 WiFi (PCIE Port) Controller ★Enabled, Disabled USB Port (BT) Enable/Disable M.2 BT(USB Port) Controller Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 64 Wake up hour Select 0-23 For example enter 3 for 3am and 15 for 3 pm. ★0 Wake up minute Select 0-59 for Minute. ★0 Wake up second Select 0-59 for Second. ★0 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 65 Watchdog Timer Feature Description Options ★Enable, Disabled Watchdog Support Enable/Disable Watchdog Support. ★Second Mode, Minute Mode Watchdog Count mode Select Watchdog Timer I count mode. Watchdog Timer Watchdog Timer I Time-out value. ★120 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 67 Description Options Enable or disable IGD video output to onboard LVDS. IGD Flat Panel Auto: Enable IGD video output to onboard LVDS when the panel is present, and vice ★Auto, Enabled, Disabled, versa. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 68 Normal: PWM=0%(Dim) ★Normal, Inverted Inverter Polarity Inverted: PWM=0%(Bright) Consult inverter board specifications for proper value. Channel Select Channel Select. ★Single Channel. Dual Channel ★VESA 8bit, JEIDA, VESA 6bit, Mode Select Mode Select. VESA 10bit Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 71 The value of Fan Duty/RPM 2 when temperature is T2. ★170 Chassis Fan FD/RPM 3 The value of Fan Duty/RPM 3 when temperature is T3. ★200 Chassis Fan FD/RPM 4 The value of Fan Duty/RPM 4 when temperature is T4. ★230 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 72: Security
PEB-2274 6.2.4 Security Feature Description Options Administrator Password Set Administrator password. User Password Set User Password Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 73 User mode. The mode change requires platform reset. Secure Boot Mode options: Standard or Custom. In Custom mode, Secure Boot Policy variables can be ★Custom ,Standard Secure Boot Mode configured by a physically present user without full authentication Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 74 Enroll Factory Defaults or load certificates from a file: Platform Key(PK) 1.Publuc Key Certificate: Key Exchange Keys a)EFI_SIGNATURE_LIST Authorized Signatures b) EFI_CERT_X509 (DER) c) EFI_CERT_RSA2048 (bin) d)EFI_CERT_SHAXXX Forbidden Signatures 2.Authenticated UEFI Variable 3.EFI PE/COFF Image(SHA256) Key Source: Factory, External, Mixed Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 75: Boot
PEB-2274 6.2.5 Boot Feature Description Options ★Disabled, Enabled CHASSIS INTRUDE Enable/Disable CHASSIS INTRUDE Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. ★1 Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 76 Enables or disables boot with initialization of a minimal set of devices required to launch active boot ★Disabled, Enabled Fast Boot option. Has no effect for BBS boot options. ★Hard Disk, NVME, Boot Option #1~#5 Sets the system boot order CD/DVD,USB Device, Network, Disabled Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 77: Save & Exit
Save Changes and Exit Exit system setup after saving the changes. Discard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 78 Restore/Load Default values for all the setup options. Save as Use Defaults Save the changes done so far as User Defaults Restore User Defaults Restore the User Defaults to all the setup options. Copyright © Portwell 2024 PEB-2274 User's Guide...
Page 79: Troubleshooting
PEB-2274 7 Troubleshooting This section provides a few useful tips to quickly get PEB-2274 running with success. This section will primarily focus on system integration issues, in terms of BIOS setting, and OS diagnostics. 7.1 Hardware Quick Installation DC Jack Power There is one method to connect the power of PEB-2274 which is 12V DC Jack (DC-IN).
Page 81: Bios Setting
To make sure that you have a successful start with PEB-2274, it is recommended, when going with the boot-up sequence, to hit “delete ” or ” Esc” key and enter Copyright ©...
Page 82: Faq
Question: I forgot my password of system BIOS, what am I supposed to do? Answer: You can switch off your power supply then find the 2-pin CLRTC on the PEB-2274 board .Then Use a metal object such as a screwdriver to short the two pins and wait 5 seconds to clean your password then to switch on your power supply.
Page 84 PEB-2274 Question: How to update the BIOS file of PEB-2274? Answer: 1. Please visit web site of Portwell download center as below hyperlink https://www.portwell.com.tw/support-center/download-center/ 2. Select “Search download” and type the keyword “PEB-2274”. 3. Find the “BIOS “page and download the ROM file and unzip file to USB flash drive (FAT 32 / 16 format ).
Page 88 PEB-2274 6. When you see the “BIOS updated successfully” message, which means the BIOS update processes finished. Please cut the AC power of and wait for 10 seconds before powering on. Copyright © Portwell 2024 PEB- 2274 User's Guide...
Page 90 PEB-2274 Question: What are the display options while using PEB-2274 board? Answer: - The PEB-2274 supports HDMI、DP、LVDS display output. Note: Please visit our Download Center to get the Catalog, User manual, BIOS, and Driver files. https://www.portwell.com.tw/support-center/download-center/ If you have other additional technical information or request which is not covered in this manual, please fill in the technical request form as below hyperlink.
Page 91: Portwell Software Service
European Portwell Technology (Netherlands) E-mail: info@portwell.eu Portwell UK Ltd. (UK) E-mail: info@portwell.eu KIOSK Embedded Systems GmbH E-mail: info@portwell.eu Portwell India Technology Private Limited. (India) E-mail: enquiry@portwell.in Portwell Korea, Inc. (Korea) E-mail: info@portwell.co.kr Copyright © Portwell 2017 PEB-2773VG2ATM User's Guide...
Page 92: Industry Specifications
PEB-2773VG2ATM 9 Industry Specifications The list below provides links to industry specifications that apply to Portwell modules. Low Pin Count Interface Specification, Revision 1.0 (LPC) http://www.intel.com/design/chipsets/industry/lpc.htm Universal Serial Bus (USB) Specification, Revision 2.0 http://www.usb.org/home PCI Specification, Revision 2.3 https://www.pcisig.com/specifications Serial ATA Specification, Revision 3.0 http://www.serialata.org/...

Portwell PEB-2274 User Manual

Quick Links

Need help?

Questions and answers

Summary of Contents for Portwell PEB-2274

Page 3: Table Of Contents

Page 5: Warranty

Page 6: Technical Support

Page 7: Introduction

Page 8: Specifications

Page 9: Supported Operating Systems

Page 10: Mechanical Dimensions

Page 12: Power Consumption

Page 13: Environmental Specifications

Page 14: Block Diagram

Page 15: Hardware Configuration

Page 16: Jumper Settings

Page 33: System Resources

Page 34: Chipset Component Driver

Page 35: Bios Setup Items

Page 37: Main

Page 39: Configuration

Page 69: H/W Monitor

Page 72: Security

Page 75: Boot

Page 77: Save & Exit

Page 79: Troubleshooting

Page 81: Bios Setting

Page 82: Faq

Page 91: Portwell Software Service

Page 92: Industry Specifications

Portwell PEB-2274 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Portwell PEB-2274

Summary of Contents for Portwell PEB-2274

Table of Contents